• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Not sure what this is called?

  • Thread starter Thread starter savegoodautonfg
  • Start date Start date Jul 28, 2006
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Jul 28, 2006
#1
  • Jul 28, 2006
  • #1
If you look under your car and you see the oil pan right after that is like what i think it where the transmission start but you can see like a little lip that comes down in front of the transmission i believe. i hope someone will understand me. the reason why im asking is beacuse my tranny is leaking off of there and one other place.
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jul 28, 2006
#2
  • Jul 28, 2006
  • #2
engine rear plate is what it is called i call it a dust shield.if you have a leak dripping from the shield its may either be your rear main seal or the front tranny seal leaking or even both..it also could be leaking from the valve covers and running down the back of the motor..
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Jul 28, 2006
#3
  • Jul 28, 2006
  • #3
What is involved in changing these seals?

And where is the front tranny seal located along with the rear main seals. im not familar with either.

is there another name for the front tranny seal?

Bill do you have aol isntant messagner?
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Jul 28, 2006
#4
  • Jul 28, 2006
  • #4
Removal of the tranny is nec. to replace the input shaft seal. You have to unbolt the retainer and then the seal comes right out of the retainer.

Rear main is the same, except you have to take off the bellhousing, clutch, flywheel.. then you get to the rear main. Cheap part, but hours to replace.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Jul 28, 2006
#5
  • Jul 28, 2006
  • #5
PoopDawg said:
Removal of the tranny is nec. to replace the input shaft seal. You have to unbolt the retainer and then the seal comes right out of the retainer.

Rear main is the same, except you have to take off the bellhousing, clutch, flywheel.. then you get to the rear main. Cheap part, but hours to replace.
Click to expand...

How are you suppose to know if either of them need to be replaced?
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jul 28, 2006
#6
  • Jul 28, 2006
  • #6
i have aim instant messeger click on the yellow man next to my signature if you have aim instant messenger to instang message me i'll turn mine on...and to know if either need replacing the best thing is to determine the leak is coming from either of the two locations and as PoopDawg stated above you need to acess the seals and since there in the same general location i would replace both...
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 28, 2006
#7
  • Jul 28, 2006
  • #7
If it's engine oil, it can also be a valve cover leak.

If you remember, in one of those PM's I mentioned making sure your PCV was up to par - it was to make sure a leaky RMS wasnt actually just a side-effect of clogged crankcase ventillation (and not actually an issue with the RMS).


Good luck.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Jul 29, 2006
#8
  • Jul 29, 2006
  • #8
HISSIN50 said:
If it's engine oil, it can also be a valve cover leak.

If you remember, in one of those PM's I mentioned making sure your PCV was up to par - it was to make sure a leaky RMS wasnt actually just a side-effect of clogged crankcase ventillation (and not actually an issue with the RMS).


Good luck.
Click to expand...

The PCV has been replaced when my engine was put in which was in May 06'
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Jul 29, 2006
#9
  • Jul 29, 2006
  • #9
bill302 said:
i have aim instant messeger click on the yellow man next to my signature if you have aim instant messenger to instang message me i'll turn mine on...and to know if either need replacing the best thing is to determine the leak is coming from either of the two locations and as PoopDawg stated above you need to acess the seals and since there in the same general location i would replace both...
Click to expand...

ARe you saying that you need to access the seals to see if they are leaking or im kinda confused. also where exactly are both so i can see where it's leaking.. the only place i see is on that engine shield at the bottom lip. its leaking on this other piece a little further to the back of the car.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 29, 2006
#10
  • Jul 29, 2006
  • #10
Whoa, I dont know what others think, but if your engine was replaced a couple months ago, NO engine seals should be leaking.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Jul 29, 2006
#11
  • Jul 29, 2006
  • #11
what kind of fluid is it
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Jul 29, 2006
#12
  • Jul 29, 2006
  • #12
Roland69 said:
what kind of fluid is it
Click to expand...

Definetly looks like tranny fluid. like my hwole transmission has fluid on it. bc of the blowby you know. but like when i get out of my car and look under it after a drive. u can see it coming off the engine shield and somewhere else.

it could be oil off the engine shield tho.

the other place i believe the tranny fluid is coming from i dont know what it is called.
 
M

Marlboro_Man

Member
Sep 30, 2005
437
1
18
Houston, TX
Jul 29, 2006
#13
  • Jul 29, 2006
  • #13
Could also be the oil pan gasket leaking, mine was leaking right under the rear main seal and was running down the pan and the backing plate as well.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Jul 29, 2006
#14
  • Jul 29, 2006
  • #14
Where exactly is the rear main seal. can i see a picture of where it is.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Jul 29, 2006
#15
  • Jul 29, 2006
  • #15
HISSIN50 said:
Whoa, I dont know what others think, but if your engine was replaced a couple months ago, NO engine seals should be leaking.
Click to expand...

Yea i know i already got the rear output shaft and the crank seal leaks fixed.

If it is'nt my engine leaking what else could it be?
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jul 29, 2006
#16
  • Jul 29, 2006
  • #16
HISSIN50 said:
Whoa, I dont know what others think, but if your engine was replaced a couple months ago, NO engine seals should be leaking.
Click to expand...
+1 i'm with you JT it should not be any of the motor seals if the install or rebuild was done properly but if you use a white cloth and place it on the ground where its leaking you should be able to determine that way if its tranny fluid it will be red...what was the condition of the motor when you put it in...rebuilt or used pulled from another car and/or what seals were replaced before install?
 

Dark Knight

Founding Member
Feb 1, 2000
2,578
0
0
Chandler, Az.
Jul 29, 2006
#17
  • Jul 29, 2006
  • #17
Check the seal at the back of the intake manifold too..
Usually, the rear main seal will leak down the front of the plate, the tranny seal wont.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Jul 30, 2006
#18
  • Jul 30, 2006
  • #18
Dark Knight said:
Check the seal at the back of the intake manifold too..
Usually, the rear main seal will leak down the front of the plate, the tranny seal wont.
Click to expand...

What seal at the back of the manifold?

Can someone give me a picture of where the rear main seal is?
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Jul 30, 2006
#19
  • Jul 30, 2006
  • #19
bill302 said:
+1 i'm with you JT it should not be any of the motor seals if the install or rebuild was done properly but if you use a white cloth and place it on the ground where its leaking you should be able to determine that way if its tranny fluid it will be red...what was the condition of the motor when you put it in...rebuilt or used pulled from another car and/or what seals were replaced before install?
Click to expand...

THe install was definetly done properly, my mechanic is very very good. I'm going to try that white cloth thing. Where is the rear main seal located and if its the rear main seal should it be oil or tranny fluid. I went through Promar Engines in NJ and i got a rebuilt long block. Everything was replaced seal wise.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Jul 30, 2006
#20
  • Jul 30, 2006
  • #20
It is leaking from the engine shield and the part that is directly under where the shifter goes. its a black part.

it looks yellowish the fluid but its coming off the tranmission for sure.

I think the crank seal is btwn the oil pan and the engine shield and if it is it's not leaking.
 
You must log in or register to reply here.

Similar threads

Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
748
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
343
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
D
For Sale 1993 Mustang LX for parts or restore
  • diesel farmer
  • Oct 6, 2026
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
421
Fox Body Mustangs For Sale (1979-93) Oct 6, 2026
diesel farmer
D
Help Identifying Engine Harness Plug
  • FoxbodyRob
  • Feb 7, 2026
  • 2.3L (N/A & Turbo) Tech
Replies
3
Views
331
2.3L (N/A & Turbo) Tech Feb 7, 2026
FoxbodyRob
Suspension End link replacement size
  • Teen'93stang5.0
  • May 12, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
302
Fox 5.0 Mustang Tech May 20, 2026
Teen'93stang5.0
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?