You could get creative with it. I don't exactly know the way it looks but you may be able to use a 45 or 90 degree 'silicone elbow'. Then connect the stock rubber thing to the silicone elbow by inserting a small section of pipe in between. Or, you may be able to figure something else out ..
Here is a site that sells AWESOME silicone stuff, browse around their site .. The stuff is not cheap, but it is worth it. My brother has a 240SX pushing like 550hp at the wheels and he uses this stuff.
http://www.hightempsilicone.com/category/4plypoly45elbows/
This is somewhat unrelated but here is a picture of my CAI on my truck. I made it using pipe, paint, and HTS cuplers (the site previously mentioned) oh, and a welder for the angle going to the filter.
Get creative
Here is a site that sells AWESOME silicone stuff, browse around their site .. The stuff is not cheap, but it is worth it. My brother has a 240SX pushing like 550hp at the wheels and he uses this stuff.
http://www.hightempsilicone.com/category/4plypoly45elbows/
This is somewhat unrelated but here is a picture of my CAI on my truck. I made it using pipe, paint, and HTS cuplers (the site previously mentioned) oh, and a welder for the angle going to the filter.
Get creative
tomustang said:
Is it really? My car (98) did not come with one but I always wondered if they helped at all. Guess not???
COramprat said:
No prob .. Just make sure, if money is not that big of an issue, to get some "T-Bolt clamps". You have to order them by diameter ... Those things are badass and are worth the 4 bucks each or whatever ..