• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

now what?

  • Thread starter Thread starter 5.0convert88
  • Start date Start date May 27, 2006

5.0convert88

New Member
Oct 9, 2003
47
0
0
palatine IL
May 27, 2006
#1
  • May 27, 2006
  • #1
ok so today i changed my spark plugs and thats all. i tryed cranking the car in its not firing its just cranking, i sounds like it wants to go but its not. i went over all the wires and checked the fireing order 3 times and still nothing . wat can it be ?
 

TrophyHead

15 Year Member
Mar 18, 2003
1,195
11
49
PA
May 27, 2006
#2
  • May 27, 2006
  • #2
TFI sensor. It's mounted on the side of your distributor. Unscrew the bolts ond pull down.

Before you go buy one you might want to search for a "cranks Ok but no start" checklist on this site. It will give you a dozen possible promblems to check.
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
May 27, 2006
#3
  • May 27, 2006
  • #3
are you getting spark at the plugs...you will have to remove one and hold the threads against a ground the header will do and have someone turn motor over keep hands free of any thing in case it cranks and be careful where you hold the plug so you don't get shocked wear a glove if you have one...and look for a spark while cranking and post rusults....and is coil wire attached...simple things are easily overlooked...
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
May 27, 2006
#4
  • May 27, 2006
  • #4
HERES A PIC. OF THE FIRING ORDER AND ENSURE THAT THE #1 PLUG WIRE IS PLUGGED INTO THE CAP WHERE YOU SEE THE 1 STAMPED ON THE CAP....

 

Attachments

  • mustang5.webp
    43.5 KB · Views: 92

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
May 27, 2006
#5
  • May 27, 2006
  • #5
If all you did was spark plugs, then the only thing you could have done is put the wires back on wrong. This is why you ALWAYS do them one at a time. Only other thing is you might have not gapped the plugs and they're all or most are either completely closed or way too open.

Nick
 

5.0convert88

New Member
Oct 9, 2003
47
0
0
palatine IL
May 27, 2006
#6
  • May 27, 2006
  • #6
i got it

i had the wires on going clockwise not counterclockwise thanks for your help guys
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
May 28, 2006
#7
  • May 28, 2006
  • #7
auesome.....
 
You must log in or register to reply here.

Similar threads

K
Resolved Weird sound coming from a freshly rebuilt 5.0L
  • karhoot
  • Jun 24, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
406
Fox 5.0 Mustang Tech Jun 27, 2026
Mac131
J
Engine Stalling
  • josh40tay
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
204
Fox 5.0 Mustang Tech Oct 21, 2026
JD1964
M
Bad starter?
  • mason5.0
  • Oct 6, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
252
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2026
General karthief
L
Engine Why won't the motor start if I have spark and fuel
  • LeviAnderson
  • Nov 20, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
568
Fox 5.0 Mustang Tech Nov 20, 2025
AeroCoupe
C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
253
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?