hey guys im giving a friend of mine a hand installing a nx wet kit. he bought the nx window switch sytem and we where wondering where to tap the rpm singal into. can you tap it into any of the 8 wire on the pcm or does it have to cyclinder one?
hey guys im giving a friend of mine a hand installing a nx wet kit. he bought the nx window switch sytem and we where wondering where to tap the rpm singal into. can you tap it into any of the 8 wire on the pcm or does it have to cyclinder one?
With my MSD window switch, the RPM signal wire was tapped into the injecter wiring. There are 2 wires. One wire is red (12V) and the second wire is the one I tapped into (they are different colors). Not sure if the NX switch is the same though. You can goto www.nitrousexpress.com to DL instructions.