• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

odd brake noise. help please.

  • Thread starter Thread starter fiveoho
  • Start date Start date Nov 19, 2009

fiveoho

15 Year Member
Apr 28, 2005
1,958
16
69
TN
Nov 19, 2009
#1
  • Nov 19, 2009
  • #1
my 00 GT is now making a squishy-creaky kind of sound when i mash the brake pedal ( stopped and moving ). sort of fluidy sounding. brake fluid is full and car still seems to stop fine. seemed to start kind of all of a sudden. it sounds like its coming from around the brake pedal itself but im not totally sure. i done a visual inspection under the dash. everything looked like its suppose to but then again, not really sure what im looking for


any help will be greatly appreciated

thanks
 
Y

yukisho

Banned
Apr 4, 2009
44
3
103
Saint George, Utah
Nov 19, 2009
#2
  • Nov 19, 2009
  • #2
If it's anything like my mercury was, where the pedal pivots I added some grease/lube to it, but it could be a number of things. Take a pic of it to get a better idea of damage and such.
 

fiveoho

15 Year Member
Apr 28, 2005
1,958
16
69
TN
Nov 20, 2009
#3
  • Nov 20, 2009
  • #3
i thought the same as you. the pivot point appears to have grease on it. theres a rubber accordion boot that attaches from the pedal mechanism to the floorboard...it sounds like it might be coming from there?


ill try and get a pic of that would help
 

99FiveOh

15 Year Member
May 20, 2006
2,051
20
99
J-Ville, FL
Nov 20, 2009
#4
  • Nov 20, 2009
  • #4
Hop under there with some WD40 or Liquid wrench and spray every pivot point or contact point you see. If the noise stops you know what the problem is. I'm also wondering if your booster could be leaking vaccum back past the rear plunger (is that what it's called?). As you mash the brake pedal the sound could be air rushing into the booster past a rubber seal or bladder.
 

fiveoho

15 Year Member
Apr 28, 2005
1,958
16
69
TN
Nov 20, 2009
#5
  • Nov 20, 2009
  • #5
The_Mustang said:
Hop under there with some WD40 or Liquid wrench and spray every pivot point or contact point you see. If the noise stops you know what the problem is. I'm also wondering if your booster could be leaking vaccum back past the rear plunger (is that what it's called?). As you mash the brake pedal the sound could be air rushing into the booster past a rubber seal or bladder.
Click to expand...

if its not a pivot point issue, is this a driving danger? also, any guestimations on how expensive to fix this problem?


note: drove the car this morning and it did not make the noise.



thank u
 

99FiveOh

15 Year Member
May 20, 2006
2,051
20
99
J-Ville, FL
Nov 20, 2009
#6
  • Nov 20, 2009
  • #6
dunno man. when it makes the noise again, pull over to a parking lot and with the car running, get under the dash and push the pedal in with your hand. And try to pinpoint where the noise is coming from.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Nov 20, 2009
#7
  • Nov 20, 2009
  • #7
Does it do it with the car off (to try and remove the vacuum assist from the scenario)? You might have to hit the brakes a few times to deplete the vac in the system.

Obviously just do this in the driveway (or someplace safe) and be careful since you will not have vacuum assist and would have to really lean on the pedal to make the car stop if it starts rolling.
 
Y

yukisho

Banned
Apr 4, 2009
44
3
103
Saint George, Utah
Nov 20, 2009
#8
  • Nov 20, 2009
  • #8
fiveoho said:
if its not a pivot point issue, is this a driving danger? also, any guestimations on how expensive to fix this problem?


note: drove the car this morning and it did not make the noise.



thank u
Click to expand...

Really when it comes to anything to do with brakes it's always dangerous if something isn't working right or making odd noises. Everything can break on your car, but the brakes are the most important part, next to the powertrain of course.
 

fiveoho

15 Year Member
Apr 28, 2005
1,958
16
69
TN
Nov 21, 2009
#9
  • Nov 21, 2009
  • #9
HISSIN50 said:
Does it do it with the car off (to try and remove the vacuum assist from the scenario)? You might have to hit the brakes a few times to deplete the vac in the system.

Obviously just do this in the driveway (or someplace safe) and be careful since you will not have vacuum assist and would have to really lean on the pedal to make the car stop if it starts rolling.
Click to expand...

when i heard the noise yesterday (while driving), it would still do it with the car off and depressing the brake pedal. however, today i drove the car all day and not one time did it make the noise
 

fiveoho

15 Year Member
Apr 28, 2005
1,958
16
69
TN
Feb 27, 2010
#10
  • Feb 27, 2010
  • #10
ugh, done it again yesterday
 
You must log in or register to reply here.

Similar threads

S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
837
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
468
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
Drivetrain Rear noise while braking.
  • 91GTstroked
  • Jul 3, 2024
  • Fox 5.0 Mustang Tech
Replies
14
Views
2K
Fox 5.0 Mustang Tech Jul 10, 2024
91GTstroked
Drive Shaft/Rear Diff Issue on 2014 GT
  • DudeStang
  • Jun 16, 2025
  • 2010 - 2014 Specific Tech
Replies
11
Views
1K
2010 - 2014 Specific Tech Jan 21, 2026
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?