• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Odd heating/blown head gasket?

  • Thread starter Thread starter Garbageman1234
  • Start date Start date Mar 8, 2008
G

Garbageman1234

New Member
Mar 8, 2008
5
0
0
Mar 8, 2008
#1
  • Mar 8, 2008
  • #1
I think there is something wrong with my 89 GT. Since the weather got cold, it has been heating up strangely. Whether I drive the car or let it idle, the water temp rises to about 230* on my Autometer gauge. It stays there only for about a minute, eventually drops to 180*, and then stabilizes. When the heat is on, it is cool up until the temp begins to drop, which at that point it instantly gets warm. I'm guessing the thermostat is taking its time to open. Is this normal?

Also, I am pretty sure my head gasket is either going or already gone (just discovered a nice puddle of white slime under the car today). Might this have anything to do with it?

Oh yeah, one other thing. Is anyone in the market for a 1989 GT with 130k miles on a stock engine?

Thank you very much for your help!
 

89streetbeast

New Member
Dec 4, 2006
365
1
0
horton,ks
Mar 8, 2008
#2
  • Mar 8, 2008
  • #2
Garbageman1234 said:
Also, I am pretty sure my head gasket is either going or already gone (just discovered a nice puddle of white slime under the car today). Might this have anything to do with it?QUOTE]

i'd be lookin at your freeze plugs first for leaks. make sure they are clean, then look at your oil dipstick, if it is other than oil, i'd suspect a head gasket, like if the oil is like a milkshake look.
Click to expand...
 
G

Garbageman1234

New Member
Mar 8, 2008
5
0
0
Mar 8, 2008
#3
  • Mar 8, 2008
  • #3
"Freeze plugs" has been added to the list.

I will check the dipstick in the morning. The oil was changed the day before yesterday, so I wonder if anything would show up even if there were a problem.

Thank you for your answer!
 

89streetbeast

New Member
Dec 4, 2006
365
1
0
horton,ks
Mar 8, 2008
#4
  • Mar 8, 2008
  • #4
Garbageman1234 said:
The oil was changed the day before yesterday, so I wonder if anything would show up even if there were a problem.
Click to expand...


if the oil was other than dark brown or clean, it would be evident. like if it was almost a milkshake look, or tan, would be runny as he!!. just a few thoughts even now, just check it, would be able to tell.
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Mar 9, 2008
#5
  • Mar 9, 2008
  • #5
t-stat???
 
G

Garbageman1234

New Member
Mar 8, 2008
5
0
0
Mar 10, 2008
#6
  • Mar 10, 2008
  • #6
Well, the oil looks fine.

The thermostat is about 3 years old.
 

NKau

Founding Member
Dec 15, 2001
1,346
0
37
Jefferson, WI
Mar 10, 2008
#7
  • Mar 10, 2008
  • #7
From what you describe, I'd bet it's definitely a thermostat. If you keep running the car at 230 degree temps, it will soon BECOME a headgasket problem though.
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Mar 11, 2008
#8
  • Mar 11, 2008
  • #8
t-stats should be changed when you flush the cooling system.. normally thats once a year.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Mar 11, 2008
#9
  • Mar 11, 2008
  • #9
Use a mr. gaskets 180 thermostat, not some cheap chain store POS.
 
G

Garbageman1234

New Member
Mar 8, 2008
5
0
0
Mar 11, 2008
#10
  • Mar 11, 2008
  • #10
Thank you all for your answers. I will definitely be changing the thermostat, and probably soon the head gasket(s)....and then eventually the entire motor.
 
You must log in or register to reply here.

Similar threads

M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
X
Engine 5.0 Head Gaskets installed wrong block coolant passages???
  • Xam Sirrah
  • Jul 21, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
953
Fox 5.0 Mustang Tech Dec 22, 2025
Qtrhrse23
Resolved Got Too Hot!!!
  • PonyGTrider
  • Apr 27, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
761
Fox 5.0 Mustang Tech May 6, 2025
PonyGTrider
Engine How common are blown head gaskets on a stock 5.0?
  • 91GTstroked
  • Dec 7, 2021
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
8K
Fox 5.0 Mustang Tech May 6, 2022
shindokwan
S
3
Engine running warm/hot...stumped
  • 347notch89
  • Sep 19, 2021
  • Fox 5.0 Mustang Tech
Replies
12
Views
2K
Fox 5.0 Mustang Tech Sep 21, 2021
2000xp8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?