• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Offroad mac pro chamber and emissions???

  • Thread starter Thread starter AnthonyR23
  • Start date Start date Apr 26, 2007

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Apr 26, 2007
#1
  • Apr 26, 2007
  • #1
Hi... so I am really considering getting a offroad mac pro chamber to go with my bbk equal length headers... I just want to see if anyone has experience with this..... in ontario we have a thing where if you fail the emissions test you can pay 100 dollars for a diagnostic test... if you pay for the diagnostic and if the repair is over I think 600 dollars they will give you a conditional pass. So I have checked all my error codes.. and have fixed everything that is emissions related... so if I put the offroad pipe on I am pretty sure the original h-pipe from ford with the 2 cats and 2 resonators is about 800 dollars. I haven't got rid of all my emissions equipment and I only use the car in the summer.. not as a daily driver.. Anyone else pass an emissions with this off road pipe.. or do you have to put the original one back on every two years??? Kinda a pain.. because I really like the sound of the pro chamber.. and my original pipe has a leak up near the collector.. and it is much cheaper to buy a offroad pipe. Any thoughts?
 

Maryland Stang

Active Member
Aug 21, 2002
1,656
30
39
Greenville, NC
Apr 26, 2007
#2
  • Apr 26, 2007
  • #2
The 4 cat (not 2 cats and 2 resonators) H-pipe from Ford is difficult to get. There are replacement catted H pipes available for well under $600 and I'd be willing to bet that the guys who do your inspection will know that. Try it, what do you have to loose besides almost $1000 because you don't want cats?
 
You must log in or register to reply here.

Similar threads

J
Emission problems
  • jls.zmmr
  • Feb 5, 2026
  • 1994 - 1995 Specific Tech
Replies
2
Views
213
1994 - 1995 Specific Tech Feb 7, 2026
AeroCoupe
M
Progress Thread 1993 Ford Mustang 5.0 convertible stock manual - ODB Codes shows running lean
  • mcalvo
  • Feb 11, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
1K
Fox 5.0 Mustang Tech Feb 22, 2025
AeroCoupe
Engine on3 Conversion to draw through MAF?
  • sav22rem22
  • Oct 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
250
Fox 5.0 Mustang Tech Oct 11, 2025
sav22rem22
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
3
Views
692
1965 - 1973 Classic Mustangs -General/Talk- Feb 28, 2026
Noobz347
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
476
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?