• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Oil pan leak?

  • Thread starter Thread starter fox racer
  • Start date Start date Oct 24, 2004

fox racer

Member
Jun 22, 2004
577
0
16
Staten Island, NYC
Oct 24, 2004
#1
  • Oct 24, 2004
  • #1
on a 93 GT, would you have to remove/lif the motor in order to change the oil pan gasket? which gasket should i get?

or about how much would it cost to have it done? thanks
 
J

jd351

Founding Member
Feb 20, 2002
163
1
0
Everett, WA
Oct 24, 2004
#2
  • Oct 24, 2004
  • #2
Yes you will have to lift the motor to change the gasket. I would replace with a stock 1 piece unit- they work the best. Know, are you sure it's the pan gasket thats leaking and not the rear main? Usualy the pan gaskets hold up very well, but rear mains go frequently in these cars.
 

fox racer

Member
Jun 22, 2004
577
0
16
Staten Island, NYC
Oct 24, 2004
#3
  • Oct 24, 2004
  • #3
im not sure, the only info i kno is "a slow leak from the oil pan" its on a car im looking into buying, i mean im going to look at it before i buy it, but im not sure yet. hopefully it is a rear main seal... you would just have to drop the tranny and remove the flywheel to replace that right?
 
J

jd351

Founding Member
Feb 20, 2002
163
1
0
Everett, WA
Oct 24, 2004
#4
  • Oct 24, 2004
  • #4
Yep, but it's a bit more than a "Just" type repair, about the same degree of work as a pan gasket, a bit easier, but not much. Either way I would not let this get in the way of the purchase, but It would be good cause to look a little deaper at it before forking over the cash.
 
B

Bobby's935.0

New Member
Oct 7, 2004
4
0
0
Oct 24, 2004
#5
  • Oct 24, 2004
  • #5
yup, it takes a litte bit of work but you can do it, i also have a 93 and my oil pan was leakin, we had to loosed the motor mounts and jack the motor up a little bit. the hardest thing is getting it out because of the k member. we used a mr. gasket gasket, its blue and has a metal core and rubber coated, put a little permatex on it and it sealed great. job took about 20 hours all together, good luck
 
You must log in or register to reply here.

Similar threads

Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
707
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
B
97 GT with 03 explorer Eddie Bauer edition 4.6l
  • basbill73
  • May 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
147
1996 - 2004 SN95 Mustang -General/Talk- May 11, 2026
squeak93
Engine Felpro 9333 pt1 (with 8psi boost)
  • JD1964
  • Jan 14, 2026
  • Fox 5.0 Mustang Tech
Replies
18
Views
1K
Fox 5.0 Mustang Tech Feb 1, 2026
Qtrhrse23
W
2016 Mustang GT fuel tank leak
  • Waynetk16
  • Oct 8, 2026
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
1
Views
133
2015 - 2023 (S550) Mustang -General/Talk Oct 9, 2026
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?