on the 5-lug conversion...can i put everything on the spindle ahead of time...

[killer5.0]

and then just bolt up the spindle? or that wouldn't work? this is going to be my first time tackling a project this big so just trying to make it as simple as possible.

 

[stykthyn]

I would put the spindles on bare then bolt everything else up afterwards. it would be very akward and heavy to do it with the calipers on.

 

[killer5.0]

okay thanks...another question on the 94-95 balljoints...do i need the whole lower control arm or just the 94-95 balljoints? thanks

 

[stykthyn]

just the ball joint or you can use the fox balljoint and put washers or spacers on it.

 

[killer5.0]

well while im in there i might as well spend the extra $100 and put new ones in...ppl say the moog ones are good so i guess ill get them. i appreciate all the help

 

[Chrome_Rust]

i just installed my 01 parts on my 93, i installed everything complete. i also installed sn95 ball joints in the fox arms.... I think it was less hassle......

 

[killer5.0]

maybe ill give it a shot...im not doing the conversion until spring...