• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Opinions And Suggestions Needed

  • Thread starter Thread starter thecableguy
  • Start date Start date May 24, 2012

thecableguy

New Member
Mar 1, 2012
2
0
1
May 24, 2012
#1
  • May 24, 2012
  • #1
Sorry if this is posted in the wrong place. ​
I have a 86 Stang 5.0. I am planning to rebuild it and need some advice and opinions.​

Rebuild the 302= What rebuild kit would you guys recommend that come with better pistons?​

Gt40p or GT 40 heads?= Which ones wold you recommend and should I upgrade the rockers and springs and if yes then what would you recommend?​

GT40 upper and lower intake=any mods suggested or leave as is?​

Cam=I am at a lost here on what cam. Too many different opinions on this ​

Injectors and fuel rails= would stock rails work and should I upgrade injectors?​

Ignition= MSD dizzy and coil​

Anyone think of something else that I might of missed? Links to products are greatly appreciated.​

This is going to be a daily for me not looking to build the ultimate street/strip motor just something fun that I can enjoy until when I can afford to build a whole different motor. ​
View attachment 149202​
I posted this on another forum but only got one not so helpful reply so I am going to try my luck here. Sorry for all the questions I am new to mustangs and the 5.0
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
May 25, 2012
#2
  • May 25, 2012
  • #2
If those are the parts you want to use, save yourself a ton of time and money, just buy an explorer gt40p engine, get the p headers, 24lb injectors, swap the cam out for an E or similar, then switch over to your accessories and be done with it.
Probably cost 80% less and be more reliable than a rebuild.

Don't use an msd dis or coil either, they are unreliable at best.
 

thecableguy

New Member
Mar 1, 2012
2
0
1
May 26, 2012
#3
  • May 26, 2012
  • #3
Thanks for the suggestion, but I am trying to build this a little cruiser for now for the least money that I can. I might just go ahead and just rebuild it and leave it stock for now as it seems that there really is nothing I can do to it for now short of stroking the motor or an engine swap.
 
You must log in or register to reply here.

Similar threads

9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
709
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Engine Hiccup at full throttle
  • keel
  • Jun 2, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
31
Views
1K
Fox 5.0 Mustang Tech Jul 30, 2026
keel
N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
334
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?