im going to order Autometer Luner Fuel and Oil Pressure gauges soon and im wondering if i will need anything else to make them work? do i need a control unit as i do with some other gauges? also these are electric right?? and im getting a Apiller pod too.
If they are electrical gauges, then you should have ALMOST everything you need.
The lone exception is that you will probably need to obtain some wiring (I believe 18-gauge wire) to run from the oil pressure sender to the oil pressure gauge.
I'm not 100% sure about the fuel pressure, but I *suspect* you may also need wire for it as well.
Just doublecheck everything that comes with the gauges, it was my experience that Autometer does not include the wiring for electrical gauges but the good news is that you can pick up wire for really cheap at any hardware or electrical store (think Home Depot or Radio Shack).
Also, here's a handy "A-pillar Gauge Pod installation guide taken from fnsweet.com , it should be useful: