Ordering odds and ends for my H/C/I swap, got a

WhiteDevil

New Member

Feb 4, 2003

2,717

0

0

San Diego

Jul 1, 2004

#1

• Jul 1, 2004

• #1

Well its an easy one. Im getting new lifters to replace my stock 106,000 mile ones. Im looking at the FMS lifters for like $115 or the Crane Lifters that are a little more i dont remember how much though. So what do you guys think is a better one to go with?? Thanks guys

 

HoofnIt

Founding Member

Jan 8, 2001

1,175

0

36

North Carolina

Jul 1, 2004

#2

• Jul 1, 2004

• #2

I'm just putting the finishing touches on my HCI swap. I replaced my lifters with the FRPP lifters. I don't think you need to upgrade unless you're building a high-revver. What heads and cam are you going with?

 

GTJake

Founding Member

Oct 28, 2002

3,049

0

56

Ann Arbor, MI

Jul 1, 2004

#3

• Jul 1, 2004

• #3

Stick with stock. I'm running my stock lifters in my car....works fine.

Jake

 

Grn92LX

Fidanza Man!

Founding Member

Jan 14, 2001

6,819

64

129

New York

Jul 1, 2004

#4

• Jul 1, 2004

• #4

New lifters won't hurt, especially when you're already that much into the engine money-wise, whats another $110? Whats your combo?

GTjake, I sent you an email earlier, check your email

 

4Jenna

Founding Member

Sep 12, 2001

4,326

6

69

AZ

Jul 1, 2004

#5

• Jul 1, 2004

• #5

Stockers here

 

TheRedBlur

Active Member

Jul 7, 2003

15

0

38

seattle

Jul 1, 2004

#6

• Jul 1, 2004

• #6

well, I bought the comp cams hydraulic lifters, talk about a waste of money! the clearances on the lifters have more slack than stock! talk about a joke! so I'd go with crane if you're going aftermarket. personally, if you are going with and H/C/I, don't short yourself on valvetrain parts, get the best you can afford.

It's a good thing I have a set of comp hi tech solid rollers, man those things are super nice!

 

9

94DreamGT

Founding Member

Jul 19, 2000

593

0

16

Indiana

Jul 1, 2004

#7

• Jul 1, 2004

• #7

I had 65,000 miles on my car when I did H/C/I. I asked Ed Curtis when I was talking to him on the phone about new lifter since if he said yes, I would've ordred them from him as well along with all the other crap I was buying from him. Point is, he had reason to tell me to buy them from him. Anyways...his response was:

"Don't waste your money...stock lifters are fine".

Now...I dont' know how another 40,000mi. would've changed his opinion, but I just wanted to share that. BTW...if he had disposable money...I would've bought them, but another $100 just wasn't in my favorable budget.

 

zenboy99

Founding Member

May 12, 2002

2,212

0

47

Madison, WI

Jul 1, 2004

#8

• Jul 1, 2004

• #8

Ed Curtis told me to go with new lifters, and he suggested the FMS version. Alot of guys in the NMRA are using FMS lifters.

 

9

94DreamGT

Founding Member

Jul 19, 2000

593

0

16

Indiana

Jul 1, 2004

#9

• Jul 1, 2004

• #9

zenboy99 said:

Ed Curtis told me to go with new lifters, and he suggested the FMS version. Alot of guys in the NMRA are using FMS lifters.

Click to expand...

Obviously...you have 163,000 miles.

With WhiteDevil's mileage, it is kindof a preference. Good idea to get them, but not really needed like they were in your case. If he has the money, do it.

 

zenboy99

Founding Member

May 12, 2002

2,212

0

47

Madison, WI

Jul 1, 2004

#10

• Jul 1, 2004

• #10

I've always heard that its a good idea to get new lifters with a new cam to have a consistent wear pattern. But I'm sure Ed knows alot more then me.

 

Grn92LX

Fidanza Man!

Founding Member

Jan 14, 2001

6,819

64

129

New York

Jul 1, 2004

#11

• Jul 1, 2004

• #11

I got the FMS ones also, at $100, I wasn't gonna cheap out since I was replacing everything above the shortblock. My car had 97k at the time.

 

M

mackey

Active Member

Jan 25, 2003

1,284

1

38

Beverly, Massachusetts

Jul 1, 2004

#12

• Jul 1, 2004

• #12

ttt

 

WhiteDevil

New Member

Feb 4, 2003

2,717

0

0

San Diego

Jul 1, 2004

#13

• Jul 1, 2004

• #13

Thanks for all the responses guys! Well like a few of the other guys said while im in there and spending money on these other parts im gonna throw on some new lifers. It looks like ill go with the FRPP lifters to replace mine.

Also my combo is

Edelbrock Performer Intake Manifold (possibly ported lower, GTJAKE u think its work it?)

Edelbrock Performer Improved Heads 1.90 and 1.60

And Crane 2031 Cam with my Crane 1.7rr

couldnt get the FTI cam my summer hours got slashed so my budget took a dump but we will see what the future brings.

 

GTJake

Founding Member

Oct 28, 2002

3,049

0

56

Ann Arbor, MI

Jul 1, 2004

#14

• Jul 1, 2004

• #14

WhiteDevil said:

Edelbrock Performer Intake Manifold (possibly ported lower, GTJAKE u think its work it?)

Click to expand...

Tom does great work. If your comfortable cleaning up the casting flash with a dremel than do that. The Performer intake should match up to the heads pretty nicely with a slight clean up. Depends on if it's worth it to you? I don't regret doing mine.

Jake

 

5

5.0_HO_GT

Founding Member

Jul 23, 2002

1,393

0

0

Poway, CA

Jul 1, 2004

#15

• Jul 1, 2004

• #15

Whitedevil,

When you get the combo up and running we'll have to hit up the track. Glad to hear you are getting some good stuff on their. I also got the FRPP lifters when I did my swap.

Oliver

 

J

jetuomi

Founding Member

Jan 30, 2002

1,464

0

0

Toronto, ON

Jul 1, 2004

#16

• Jul 1, 2004

• #16

Ed told me to go with Eaton lifters that he sent me... anyways, mine were 160,000 mile lifters so he said new ones for me!!