Oxygen Sensors

[Mavrick]

Bought some used oxygen sensors from a guy, they are bosch and looked to be nearly new. I assumed the guy gave me the right ones, and went ahead and cleaned them up, and installed them. After screwing them in nice and tight, i noticed that the connectors don't match up with my harness!! WTF?

Did stangs have different connectors through the years at all? What about SN95, if so, what do they look like?

Thanks

 

[bhuff30]

just solder in your old connectors. The O2's still work the same way.

 

[Mavrick]

Thats the thing, the o2's that were on the car when i bought it had snapped off, and have no pugtails or connectors on them! I don't want to mess up the harness. Maybe ill try a scrap yard

 

[Michael Yount]

I wouldn't try to mess with used O2's - too much chance for something not working right, and they do have a limited life anyway. I'd pony up the bucks at the parts store for two new ones for your year model car - that way you'll know that they'll plug into the rest of the harness like they should.