Oxygen Sensors

Mavrick

Founding Member

Aug 29, 2002

2,264

0

46

Collingwood, ON

Apr 24, 2004

#1

• Apr 24, 2004

• #1

Bought some used oxygen sensors from a guy, they are bosch and looked to be nearly new. I assumed the guy gave me the right ones, and went ahead and cleaned them up, and installed them. After screwing them in nice and tight, i noticed that the connectors don't match up with my harness!! WTF?

Did stangs have different connectors through the years at all? What about SN95, if so, what do they look like?

Thanks

 

bhuff30

Founding Member

Dec 11, 2001

6,037

35

129

Olathe KS

Apr 25, 2004

#2

• Apr 25, 2004

• #2

just solder in your old connectors. The O2's still work the same way.

 

Mavrick

Founding Member

Aug 29, 2002

2,264

0

46

Collingwood, ON

Apr 25, 2004

#3

• Apr 25, 2004

• #3

Thats the thing, the o2's that were on the car when i bought it had snapped off, and have no pugtails or connectors on them! I don't want to mess up the harness. Maybe ill try a scrap yard

 

Michael Yount

Mustang Master

Apr 10, 2002

9,039

6

79

Charlotte, NC

Apr 25, 2004

#4

• Apr 25, 2004

• #4

I wouldn't try to mess with used O2's - too much chance for something not working right, and they do have a limited life anyway. I'd pony up the bucks at the parts store for two new ones for your year model car - that way you'll know that they'll plug into the rest of the harness like they should.