p/v clearance on this combo

[blk9450]

ok stock 94 bottom end. b cam, tf twisted wedge heads and fms 1.72 rr so should i have problems, i will use the modeling clay method, but i just wanted a prelimanary idea before i rip it apart. thanks

 

[Michael Yount]

Try this method instead, and with the cam and heads, measuring's the only way to know if you're ok or not.

http://www.diyporting.com/PVC.html

 

[blk9450]

yea i dont have the heads on the car yet, i just wanted to see if anyone had the same or a close setup to bas it off of, thanks

 

[Michael Yount]

I know that Ford Racing recommends checking it with the E cam and the Y303 heads - less duration, and smaller valves than your combo (although the 2.02's not as bad in the tfs because of the configuration). It's close enough that you're doing the right thing by checking - and just be happy if you've got plenty of clearance.