• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Paint on my Intake?

  • Thread starter Thread starter newjersey
  • Start date Start date Nov 9, 2007
N

newjersey

New Member
Oct 18, 2007
13
0
0
Nov 9, 2007
#1
  • Nov 9, 2007
  • #1
Recently had my upper cobra intake sandblasted to get rid of some paint , I think im going to clear it , but i was wondering if i should use a high temp. clear spray paint or a regular clear... Not even sure if they make a high temp clear? Also i think the inside of the trottle body opening was sandblasted a little bit will this hurt any kind of air flow or performance might be a supid question but let me know Thanks Guys ...
 

Killer50stang

New Member
May 11, 2004
632
0
0
Nov 9, 2007
#2
  • Nov 9, 2007
  • #2
newjersey said:
Recently had my upper cobra intake sandblasted to get rid of some paint , I think im going to clear it , but i was wondering if i should use a high temp. clear spray paint or a regular clear... Not even sure if they make a high temp clear? Also i think the inside of the trottle body opening was sandblasted a little bit will this hurt any kind of air flow or performance might be a supid question but let me know Thanks Guys ...
Click to expand...

Regular clear will peel for sure. I would sand it down to a nice polish. There are some good threads on here on how to do it. I've never seen high temp clear...
 

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Nov 9, 2007
#3
  • Nov 9, 2007
  • #3
yeah there's high temp clear. you can get it anywhere you can get high temp paint. you should paint the intake too, not just clear it. get a high heat aluminum paint and high heat clear. here's what mine looked like after i painted it this past summer. still looks just as good too!



 

Attachments

  • DSCF0696.webp
    31 KB · Views: 249
  • DSCF0695.webp
    43.2 KB · Views: 209
N

newjersey

New Member
Oct 18, 2007
13
0
0
Nov 10, 2007
#4
  • Nov 10, 2007
  • #4
Thanks alot Killer .. Hey Cenok what paint did you use for that came out fantastic looking??? Big Help Thanks
 

Killer50stang

New Member
May 11, 2004
632
0
0
Nov 11, 2007
#5
  • Nov 11, 2007
  • #5
cenok is family said:
yeah there's high temp clear. you can get it anywhere you can get high temp paint. you should paint the intake too, not just clear it. get a high heat aluminum paint and high heat clear. here's what mine looked like after i painted it this past summer. still looks just as good too!



Click to expand...

This looks good. I'll remember this when I do mine. Chrome is just too hard to take care of.

Jason
 

Attachments

  • DSCF0696.webp
    31 KB · Views: 267
  • DSCF0695.webp
    43.2 KB · Views: 227

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Nov 11, 2007
#6
  • Nov 11, 2007
  • #6
i used duplicolor DH 1606 High Heat Aluminum and DE 1636 Clear. the aluminum SAYS it can handle up to 1200*F and the clear can handle up to 500*F. you can get them both at an autoparts store that sells paint. autozone, oreillys, advanced, etc.
 

90_Red_LX

Member
Sep 29, 2003
668
5
19
Asheboro, NC
Nov 11, 2007
#7
  • Nov 11, 2007
  • #7
I painted my intake over a year ago and the paint heat wise has held up fine. I've chipped it, and it's sort of dulled due to a lack of clear, but I like the look.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Nov 12, 2007
#8
  • Nov 12, 2007
  • #8
That looks amazing!
 

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Nov 12, 2007
#9
  • Nov 12, 2007
  • #9
cenok is family said:
i used duplicolor DH 1606 High Heat Aluminum and DE 1636 Clear.
Click to expand...

Dupli-Coloer also makes a "Cast Aluminum" rated 500 degrees - excellent paint line. Don't put the clear on too thick or it will yellow noticeably after a couple of years.
 
I

importhater5.0

New Member
May 15, 2003
94
0
0
West Chester, Pa
Nov 12, 2007
#10
  • Nov 12, 2007
  • #10
i would paint it silver and then clear it as stated above, and realistically, you really dont need high temp on the upper plenum...think about the paint on your car body, sometimes in the summer you cant even touch the hood or the roof cause its so hot when your cars been sitting in the sun. It doesnt hurt to use it, but its not really necessary.
 
You must log in or register to reply here.

Similar threads

F
Need body/paint shop in san jose area
  • FordFan
  • Nov 13, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
6
Views
890
1965 - 1973 Classic Mustangs -General/Talk- Nov 21, 2025
Noobz347
SOLD Trick Flow Box R Series Upper Intake w/90 mm Inlet
  • Habu135
  • Apr 30, 2026
  • Engine and Power Adder
Replies
2
Views
400
Engine and Power Adder Aug 19, 2026
Habu135
B
Saying Hi
  • BriansNSane
  • Dec 20, 2025
  • The Welcome Wagon
Replies
5
Views
415
The Welcome Wagon Dec 21, 2025
BriansNSane
B
Resolved Got Too Hot!!!
  • PonyGTrider
  • Apr 27, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
764
Fox 5.0 Mustang Tech May 6, 2025
PonyGTrider
M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?