• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Pancakes and Smoke.

  • Thread starter Thread starter Redeemedsoul
  • Start date Start date Jan 15, 2008

Redeemedsoul

New Member
Sep 4, 2005
70
0
0
Jan 15, 2008
#1
  • Jan 15, 2008
  • #1
Hello all,
While driving around tonight with the 87 gt, began to smell some very delicious pancakes. While driving thinking its just some coolant spillover, I decide not to stop. Get home, and let her idle before shutting her off and huge clouds of smoke come from under the hood. (white smoke) I lift up the hood while the car still running and still smoking, and i assume the worse electrical fire. The smoke was coming from the top left side of the engine bay when looking at it. There was no sparks or flames, no electrical fire like i thought, just alot of smoke coming from that area.

Still smells like pancakes, so I'm letting it sit until tomm.

Any suggestions what it could be, car isnt dripping on driveway..

-rS
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Jan 15, 2008
#2
  • Jan 15, 2008
  • #2
did you lose a coolant hose or heater core, that leaked down on the exhaust? I don't know screw it I am hungry for pancakes now......later
 

TRWXXA

Member
Jan 18, 2003
190
1
19
RIGHT BEHIND YOU!!!... Made you look.
Jan 16, 2008
#3
  • Jan 16, 2008
  • #3
Mmmmmmmmmmmmmm.... pancakes.

View attachment 336662



Yep. Sounds like you have a leaking heater core hose, or a coolant leak in that area.

Some hose leaks are only apparent when the engine is revving and the coolant is under pressure. Start the motor and have someone rev it up to build up coolant pressure, while you look for spraying coolant. For safety, don't be standing real close to the engine when your assistant first opens the throttle, just in case it starts to spray coolant all over the place.
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Jan 16, 2008
#4
  • Jan 16, 2008
  • #4
the heater core's crain is right above the passenger side exhaust pipe in the firewall. look right below the a/c stuff and you will see it. its a little rubber gromet with a rubber line coming out of it. check and see if coolant is coming out of it.
 

Redeemedsoul

New Member
Sep 4, 2005
70
0
0
Jan 16, 2008
#5
  • Jan 16, 2008
  • #5
I just started the car, and like you guys said coolant is dripping onto the cat on the right side of the hpipe. I still can't see where its coming from but it definetly is coolant, im going to put the car on some ramps, and take another look in about an hour or so. Ill keep everyone updated.

Thanks,
-rS
 

Redeemedsoul

New Member
Sep 4, 2005
70
0
0
Jan 16, 2008
#6
  • Jan 16, 2008
  • #6
I just looked and there is coolant coming out of a small hole, dripping onto the exhaust. on the backwall , no hoses or anything there just a small hole dripping coolant..
 

Redeemedsoul

New Member
Sep 4, 2005
70
0
0
Jan 16, 2008
#7
  • Jan 16, 2008
  • #7
Heater cores shot, is it safe to bypass it until i get it fixed. I'm aware i would have no heat, but any damaging effects of just running the two coolant hoses to themselves.
-rS
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Jan 16, 2008
#8
  • Jan 16, 2008
  • #8
yes just get a small hose and loop the two back steel transfer tubes together
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Jan 16, 2008
#9
  • Jan 16, 2008
  • #9
Redeemedsoul said:
I just looked and there is coolant coming out of a small hole, dripping onto the exhaust. on the backwall , no hoses or anything there just a small hole dripping coolant..
Click to expand...

i wonder what hole
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Jan 16, 2008
#10
  • Jan 16, 2008
  • #10
Echo huh
 

Fast63

New Member
Sep 20, 2007
717
0
0
Jan 16, 2008
#11
  • Jan 16, 2008
  • #11
BK_CAULEY said:
i wonder what hole
Click to expand...

Dunno, but mine did the same thing. Dripped right on the cat...
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Jan 16, 2008
#12
  • Jan 16, 2008
  • #12
Fast63 said:
Dunno, but mine did the same thing. Dripped right on the cat...
Click to expand...

you have got to be kidding me. its days like these i wish i was at work.
 
3

347 Pony

New Member
Jan 14, 2008
36
0
0
Sterling, VA
Jan 16, 2008
#13
  • Jan 16, 2008
  • #13
bypass it, it won't hurt anything. If you don't have a/c you can hook your heater hoses up to the ac ports located near the heater core and you will have super hot heat but will never have a/c again unless you replace some parts.
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Jan 16, 2008
#14
  • Jan 16, 2008
  • #14
347 Pony said:
bypass it, it won't hurt anything. If you don't have a/c you can hook your heater hoses up to the ac ports located near the heater core and you will have super hot heat but will never have a/c again unless you replace some parts.
Click to expand...

DO NOT do that. that is probably the worst advice you could ever give him. not trying to make you mad but dang man think before typing.
 

Redeemedsoul

New Member
Sep 4, 2005
70
0
0
Jan 16, 2008
#15
  • Jan 16, 2008
  • #15
I'm going to try my hand at fixing it. I couldnt find any type of rubber tube that could make that bend without folding/clamming up. I have to do the steering wheel and speedo swap anyways so removing the dash might be a good thing. Also got some electrical gremlins i need to get sorted out.
I'll be back, thanks for the help guys!
-rS
 
F

fordfreak300

New Member
May 29, 2004
10
0
0
Los Angeles
Jan 16, 2008
#16
  • Jan 16, 2008
  • #16
Sounds like the perfect time to take the dash out and fix a few things at once. Putting in a new heater core is the way to go. Also make sure either your hose has the reducer in it, or put a 13mm 1/4 drive socket into your hose to slow down the coolant so it doesn't have too much pressure. My hose has the pressure reducer already in it.
 
You must log in or register to reply here.

Similar threads

Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
401
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
S
Help with window and possible engine
  • StefRena22
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
931
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2025
Willybill32
M
2001 v6 heater return pipe leak question
  • mnky99
  • Nov 11, 2025
  • SN95 V6 Mustang Tech
Replies
1
Views
264
SN95 V6 Mustang Tech Nov 11, 2025
mnky99
M
B
2001 roush stage 3 - sat for 5 years
  • Brando_05
  • Aug 26, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
262
1996 - 2004 SN95 Mustang -General/Talk- Aug 26, 2025
Brando_05
B
Y
2004 Mustang GT AUTO (4R70W) Grinding noise when going in R or Drive does it as I put it into park too
  • yellowandblack
  • Dec 12, 2024
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
322
1996 - 2004 SN95 Mustang -General/Talk- Dec 21, 2024
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?