part number for short belt no smog pump

[dustang85]

I am wondering what the part number is for the short belt is to eliminate the smog pump..

 

[vristang]

The required belt length can vary, depending on pulley sizes.
Does the car have underdrive pulleys?
Have any of the pulleys been swapped out? For example I have a bronco ps pulley in mine.

The best solution is to measure with a piece of string, to get you close.
This has never worked on the first try for me though. I always have to go back to the parts store at least once.

jason

 

[Beasly B]

use a 76 inch belt to bypass the smog pump I found the info in an official ford book. I used it on my 91 and it works fine, it's a little tight but it works.

 

[$uperstang]

I would say an 83.5" if you still have A/C

 

[TheUser]

Micro V K060775 (O'Reilys) - it's measured in millimeters and I believe it was like 2020mm or something like that, but that's the part number....right around 84 inches. You don't want it too tight and the tensioner will make up for some slack.

 

[Strype]

Use a ball of twin or kite string... pull the tensioner up a ways, and then cut the string. Measure it.

Or... do what I did. Find someone you know at a parts store and make them chase belts for you for awhile

 

[Matts89LX5.0]

not sure of belt size, but maybe there should be a sticky for belt sizes

 

[aleborjas]

i have in mines all stock accesories exp smog pum and i have 6PK2195 from dayco or gates