Part numbers

[Stableboy]

Hi,
After 3 long years I am finally starting to get my 84 SVO roadworthy. The 2.25 per gallon gas prices are helping that choice. I have a few questions, and being a new father, I don't have much time to research the answers, so I am banking on your knowledge.
1. I need exhaust from cat back. I have called many places and no one has what I need. I would prefer the 84 style, single side exit, but I will take the later style if that is all that exists. If I go to the later style, are all the mounting points there or do I have to make points for attachment? Any part numbers would be of great help.
2. I might need brake pads, any idea on part numbers of aftermarket or opinions?
3. I need plugs and wires, any suggestions? The local Ford place isn't helpful.
4.Where can I get the Marchal fog light lamp?
5.The power steering pump leaks. Is this common? ARe new ones/remanufactured available?
Thank you in advance. I am happy to finally start this project but I am getting frustrated by these problems. Thank you
Andrew

 

[Dr_EluSivE]

Hi,
After 3 long years I am finally starting to get my 84 SVO roadworthy. The 2.25 per gallon gas prices are helping that choice. I have a few questions, and being a new father, I don't have much time to research the answers, so I am banking on your knowledge.
1. I need exhaust from cat back. I have called many places and no one has what I need. I would prefer the 84 style, single side exit, but I will take the later style if that is all that exists. If I go to the later style, are all the mounting points there or do I have to make points for attachment? Any part numbers would be of great help.
2. I might need brake pads, any idea on part numbers of aftermarket or opinions?
3. I need plugs and wires, any suggestions? The local Ford place isn't helpful.
4.Where can I get the Marchal fog light lamp?
5.The power steering pump leaks. Is this common? ARe new ones/remanufactured available?
Thank you in advance. I am happy to finally start this project but I am getting frustrated by these problems. Thank you
Andrew

Just bought some of that stuff for my swap, and happen to have the numbers handy

These are all Motocraft #'s Best for these cars..
Plugs AWSF32C
Wires WR-4011-C
PCV valve EV127-A
The cap and rotor boxes are outside, so i dont have that handy, but if you need em let me know.
As for the PS pump, that shouldnt be hard, try advance, or autozone should have em

not sure on exaust or brake pads though

Dr.

 

[RustBucket]

Brake pads

Autozone Duralast/Albany -MKD200
Duralast Gold - DG200

Performance Friction Carbon Metallic - 0199-20

Raybestos - PGD200M

Wagner -ZD199

 

[Stableboy]

thanks for the info, the most important one is the exhaust. is this the same as a n/a 2.3 or 84 gt? are any of the tbird pipes transferable? thanks