Randomly the other day the electric window on the passenger side stopped working.. I pulled the door panel off to see if the motor was blown or what the cause could have been. The wires that the switch popped out of the plastic piece that was holding them together. So now I have a bunch of wires I do not know where they go.. I found this on the forum
I think I had it hooked up correctly but the window did not move..
I did put power directly to the motor, I got it to go up and down.
The pink wire has 12v all the time
The red/black has power when the switch on the driver side is pressed, same with the yellow/black... is their no ground?
Sent from my iPhone using Tapatalk
I think I had it hooked up correctly but the window did not move..
I did put power directly to the motor, I got it to go up and down.
The pink wire has 12v all the time
The red/black has power when the switch on the driver side is pressed, same with the yellow/black... is their no ground?
Sent from my iPhone using Tapatalk