paxton intercooler with vortech blower

S

swl987

Member

May 6, 2004

200

0

16

Cleveland,Oh

Apr 3, 2009

#1

• Apr 3, 2009

• #1

The paxton kit comes with 3 pieces of duct work. One long one with a 90degree bend, a short one with a 45degree bend, and a longer one with a 45degree bend. Which pipe is the one that connects to your original vortech discharge pipe? The one that you weld your bypass into. The pipe with the 90degree bend, it has a bung on it, what connects to that?

 

96SCstang

New Member

Jul 22, 2006

228

0

0

novi, MI

Apr 3, 2009

#2

• Apr 3, 2009

• #2

i am not a 100% sure but i believe the bung is for a IAT temp sensor. hopefully someone with this setup will chime in and be of some help

 

S

spederman

Member

Apr 13, 2005

732

0

16

Apr 4, 2009

#3

• Apr 4, 2009

• #3

are u running blow thru or draw thru setup? u will also end up cutting the orig vortech discharge tube to make it fit

 

S

swl987

Member

May 6, 2004

200

0

16

Cleveland,Oh

Apr 5, 2009

#4

• Apr 5, 2009

• #4

spederman said:

are u running blow thru or draw thru setup? u will also end up cutting the orig vortech discharge tube to make it fit

Click to expand...

not sure,explain

 

S

spederman

Member

Apr 13, 2005

732

0

16

Apr 6, 2009

#5

• Apr 6, 2009

• #5

Is your MAF before the supercharger or after it?

 

S

swl987

Member

May 6, 2004

200

0

16

Cleveland,Oh

Apr 7, 2009

#6

• Apr 7, 2009

• #6

spederman said:

are u running blow thru or draw thru setup? u will also end up cutting the orig vortech discharge tube to make it fit

Click to expand...

maf is before, I have draw through. I found out what that means.

 

S

spederman

Member

Apr 13, 2005

732

0

16

Apr 7, 2009

#7

• Apr 7, 2009

• #7

ok, i have a blow thru. i'm not sure how you would route the piping then since we have different setups. Sorry i couldnt be more help.