• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

paxton novi 1000 on my car?

  • Thread starter Thread starter FSTRDNU
  • Start date Start date Apr 13, 2006

FSTRDNU

New Member
Aug 9, 2005
76
0
0
Apr 13, 2006
#1
  • Apr 13, 2006
  • #1
i have a e303 cam, ported/shaved/oversized intake valved e7's.

my motor is origional w/ 115k on it.

i trap at 108 in the 1/4

i am about to buy a car w/ a novi 1000 on it, and i would like to put the blower on my car.

will i be ok, it is building 7psi on his car.

i have a 93, w/ hyper pistons, will i be ok,

and his ecu id chipped, it is a 89, can i just take his ecu?
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Apr 13, 2006
#2
  • Apr 13, 2006
  • #2
Should be fine. Swapping processors is easy enough, or if you'd like you can just swap the chip to your processor.... It'd be good for a base tune, but no two cars are the same and you will need to have it professionally retuned.

Nick
 

BlueRevenge

You will know wind when it escapes from my ass.
Founding Member
Mar 13, 2002
159
0
0
Washington State
Apr 14, 2006
#3
  • Apr 14, 2006
  • #3
Hope you're not buying the car just for the blower. If so, I hope it's real damn cheap.
I've had a Novi 1k for about 3 years now (bought when first came out) and I hate it. Step up to a 2K or go kenne belle. With just a few mods you've probably already outgrown the output of the blower. I got a somewhat similar setup to you and I barely lay down 6-8 pounds of boost.

[edit] I take that back, you're putting down a bit more power than I was when I bolted mine on. Think I was running 105 in the 1/4. From the stock blower, I've added around 500 dollars worth of mods to the blower to get the boost I'm getting. I'm thinking you're going to be pushing 6# max with a 1k.
 

FSTRDNU

New Member
Aug 9, 2005
76
0
0
Apr 15, 2006
#4
  • Apr 15, 2006
  • #4
i bought the car for 2800, and it a super clean 5 speed 89, red w/ a 373
f/s btw for 2800 w/o blower

btw is it a hard swap? time wise?
 

mustangsally93

New Member
Sep 26, 2005
281
0
0
Omaha,NE
Apr 15, 2006
#5
  • Apr 15, 2006
  • #5
I had a stock block and some bolt-ons on it and I cracked the block running 10 psi. I hope you don't do it to...
 
You must log in or register to reply here.

Similar threads

D
Looking for injector upgrade over the paxton novi 1000 injectors
  • DeltaDetrix
  • Nov 16, 2022
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- Mar 27, 2023
Deleted member 38176
D
8
planning project of adding a supercharger
  • 87fox72mach
  • Dec 22, 2021
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 18, 2022
KZGUNS
Progress Thread Dirty Water Racing 89 Notch Project
  • ShedBuiltMS
  • Sep 29, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
64
Views
13K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2021
Flyboy60
F
So,...You're gonna take your car to a shop to have it worked on...lets talk.
  • CarMichael Angelo
  • Mar 3, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 3, 2019
Rdub6
O
For Those Who Care
  • OhNo- 5-0
  • Mar 9, 2016
  • Fox 5.0 Mustang Tech
Replies
5
Views
2K
Fox 5.0 Mustang Tech Mar 14, 2016
7991LXnSHO
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?