• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Pcv valve and breathers

  • Thread starter Thread starter MY 85 GT
  • Start date Start date Aug 13, 2008

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
Aug 13, 2008
#1
  • Aug 13, 2008
  • #1
Ok i just removed my PCV and im running 2 breathers in my valve covers...The cheapo pcv valves from autozone are crap i just ordered 2 motorcraft ones form ford...Actually i dont think running 2 breathers are going to hurt anything will it? The car seems to idle way better and seems to run better also...
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 13, 2008
#2
  • Aug 13, 2008
  • #2
As long as you run only a closed PCV system or you run only breathers (don't mix the two), you should be fine.
 

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
Aug 13, 2008
#3
  • Aug 13, 2008
  • #3
HISSIN50 said:
As long as you run only a closed PCV system or you run only breathers (don't mix the two), you should be fine.
Click to expand...


Thanks I run 2 moroso 3 inch open type breathers on both valve covers...I want to get 2 K@N type down the road so i should be ok that way?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 13, 2008
#4
  • Aug 13, 2008
  • #4
MY 85 GT said:
Thanks I run 2 moroso 3 inch open type breathers on both valve covers...I want to get 2 K@N type down the road so i should be ok that way?
Click to expand...

That's fine. Just delete the PCV altogether (dont forget to deal with the bypass hose from the inlet to the oil filler).

One small point: PCV is more effective because you use manifold vac to actively pull vapor out of the crankcase. Breathers simply let pressure ooze out.
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Aug 13, 2008
#5
  • Aug 13, 2008
  • #5
HISSIN50 said:
As long as you run only a closed PCV system or you run only breathers (don't mix the two), you should be fine.
Click to expand...


Is this a EFI thing only? My 82 Capri with carb has a PCV in the breather and a breather on the other valve cover. Should I close off theother breather?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 13, 2008
#6
  • Aug 13, 2008
  • #6
93 LX said:
Is this a EFI thing only? My 82 Capri with carb has a PCV in the breather and a breather on the other valve cover. Should I close off theother breather?
Click to expand...

Good question.

It's actually a mass-air thing. Mixing breathers and a PCV valve leads to unmetered air concerns.
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Aug 13, 2008
#7
  • Aug 13, 2008
  • #7
One EFI its either a closed PCV or breathers, I prefer the closed PCV since a passive breather system is not very good at removing the corrosive vapors from the crankcase.

On carbed cars its a breather with PCV set up. So I guess its an open PCV system.

Personally I like to run a PCV system vs a passive system with the breathers.
 
You must log in or register to reply here.

Similar threads

P
Vacuum
  • ProTechAutoServices
  • Aug 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
337
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 2, 2026
Noobz347
M
Resolved PCV Tube and Valve Cover Breather Hole Locations
  • MDrisc
  • Sep 11, 2024
  • Fox 5.0 Mustang Tech
Replies
3
Views
1K
Fox 5.0 Mustang Tech Sep 22, 2024
MDrisc
M
Engine on3 Conversion to draw through MAF?
  • sav22rem22
  • Oct 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
372
Fox 5.0 Mustang Tech Oct 11, 2025
sav22rem22
A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
613
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?