Pedestal roller rockers

evilwater

New Member

Jul 30, 2003

70

0

0

windom MN

Apr 13, 2005

#1

• Apr 13, 2005

• #1

does any one know were a can get a good set of 1.7 Pedestal roller rockers for stock 5.0 heads. im putting the ford e303 cam and want to get alot of lift with out slamming the valve into the piston. if they dont make the 1.7 in that does anyone know if the 1.72 will work without a problem anyone have the same combination???

 

M

mustang_2099

New Member

Mar 31, 2005

25

0

0

Camrose AB, Canada

Apr 13, 2005

#2

• Apr 13, 2005

• #2

I don't really think that the crane/frpp cobra 1.7 pedistals are that bad I put them on and they work great, there fairly cheap too.

 

R

Ray@VSK

New Member

Aug 27, 2004

355

0

0

Apr 13, 2005

#3

• Apr 13, 2005

• #3

You sure the stock valve springs can handle that ?

 

5spd GT

"the 5.0 owns all"

Founding Member

Aug 7, 2002

9,516

6

99

Arkansas

Apr 13, 2005

#4

• Apr 13, 2005

• #4

I'm not sure on the p-v clearance issues with that cam and those size RR's.

I had 1.7 Crane/Ford RR's with my stock cam and valve springs and it worked just fine...

With that cam and the roller rocker ratio your wanting you very well could experience valve float in the higher rpms...

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

Apr 13, 2005

#5

• Apr 13, 2005

• #5

Stock heads probably won't get much benefit from over .500 lift without some porting work.

 

DarkMesa8

Founding Member

Oct 15, 2002

1,087

0

0

Orlando, FL

Apr 13, 2005

#6

• Apr 13, 2005

• #6

Email me, I have a set that will work for you.

jasonweg@comcast.net

Let me know you're from this post.