• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Pepper in the radiator fix

  • Thread starter Thread starter robbz28
  • Start date Start date Nov 30, 2011

robbz28

Member
Sep 23, 2009
775
5
19
Epps, LA
Nov 30, 2011
#1
  • Nov 30, 2011
  • #1
Alright, I know some of you have heard of putting pepper in a radiator to repair a small leak. Well, I had a small leak...but not in the radiator, in the gasket between the timing cover and the block and it would pool up about an ounce of water over a week...not really a bad leak more of a seep (should have replaced that gasket when I had the chance) Anyway, I put a tablespoon of pepper in the radiator and now, not a trace of water after a week of running the car over 200 miles. So, since the pepper helped seal up my leak, I'm curious if anyone else has done this and how long this little trick worked for? Any adverse effects of this trick? I know I will eventually need to replace the gasket proper, but as long as this holds up, why not run it?
On a related note, I took my thermostat out this past summer because it failed, and i never put a new one in, I also put in a 2 row aluminum radiator, i went to work this morning in the stang (35 degrees outside) and when I started going down the road, my temp dropped below 100 and my heater almost started blowing cold.....guess i need to get to autozone and get myself a 170 degree thermostat, lol.
 

Slobin3d

Active Member
Aug 29, 2011
246
17
38
Nov 30, 2011
#2
  • Nov 30, 2011
  • #2
Never heard of pepper, Eggs I've seen before.
 
D

danond

Member
Jun 20, 2011
36
0
7
Nov 30, 2011
#3
  • Nov 30, 2011
  • #3
Geezus.

--
Dan in ND
'89 'vert GT undergoing full resto.
 

robbz28

Member
Sep 23, 2009
775
5
19
Epps, LA
Dec 1, 2011
#4
  • Dec 1, 2011
  • #4
I had heard of eggs too...but I didnt like the thought of a huge chunk of egg globbing up and stopping up a couple of my rows, at least the pepper can be like stop-leak, use what it needs to stop the leak and a little pepper floating around in there can't be any worse than the other rust/crud that floats around in there normally after time. Despite my best efforts to get my cooling system spotlessly clean I still end up with debris in my system. I took off my lower rad hose and shoved a fire hose inside it and ran the engine for about 10 minutes and let that clean water circulate...but still I have little bits of rust or whatever floating around in there.
 
2

2+2GT

10 Year Member
Apr 25, 2009
3,333
10
79
Southeastern Pennsylvania
Dec 1, 2011
#5
  • Dec 1, 2011
  • #5
My Grandad used water glass. I must say, the results are amazing, but it's hard to find.
 

robbz28

Member
Sep 23, 2009
775
5
19
Epps, LA
Dec 1, 2011
#6
  • Dec 1, 2011
  • #6
Water Glass aka Sodium Silicate, you can buy it from ebay all day long in gallon jugs for like 25 bucks. It does work good for most kinds of leaks, but this being in a gasket, that sodium silicate likes metal to metal, not sure how it would have done on this gasket. I actually had a leak in my heater core on my old camaro and I used the pepper trick....I kept that car for 3 years after that and it never leaked on me, so we'll see!
BTW...Ebay is a great place to get "chemistry supplies" Thats where I get my dark aluminum powder for my exploding targets (like the ones they use on top shot)
 

N8Dogg98

15 Year Member
Apr 4, 2005
3,872
238
184
MN
Dec 1, 2011
#7
  • Dec 1, 2011
  • #7
I'd also suggest sprinkling some salt and paprika in that baby... should fix it up nice
 

robbz28

Member
Sep 23, 2009
775
5
19
Epps, LA
Dec 1, 2011
#8
  • Dec 1, 2011
  • #8
Oh yeah...well how about this one right here...

Season Shot - Ammo with flavor.

Click it, its worth it.
 

N8Dogg98

15 Year Member
Apr 4, 2005
3,872
238
184
MN
Dec 1, 2011
#9
  • Dec 1, 2011
  • #9
that's great!
 

robbz28

Member
Sep 23, 2009
775
5
19
Epps, LA
Dec 1, 2011
#10
  • Dec 1, 2011
  • #10
Hey N8Dogg, r u a no-limit soulja?
 

N8Dogg98

15 Year Member
Apr 4, 2005
3,872
238
184
MN
Dec 1, 2011
#11
  • Dec 1, 2011
  • #11
no, but it went with my internet handle I've had for many years
 

Hack

15 Year Member
Mar 23, 2004
1,945
13
69
Minneapolis
Dec 2, 2011
#12
  • Dec 2, 2011
  • #12
I've heard of it just like I've heard of using ATF for purposes outside of the automatic transmission. I wouldn't use either, though.

I would always buy a product designed specifically for what I'm trying to do especially when the product only costs a couple bucks. I like Barr's Leaks for cooling system seepage. Usually I will replace the actual part causing the leak rather than using a stop leak product, though. Stop leak products can build up and reduce the cooling system's effectiveness.

Good story though, bra.
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
42,982
21,160
234
Box behind Walmart
Dec 2, 2011
#13
  • Dec 2, 2011
  • #13
I've used the stop leak stuff before. It came in a little plastic vial and looked like metal shavings. Well I front ended an International Scout at a rock quarry I was mudding in, and this stuff sealed up about a dozen pretty major leaks in about 5 min. It was pretty kewl to watch and the gysers sealed themselves up.
 

65ShelbyClone

Founding Member
Sep 9, 2000
4,675
38
119
Antelope Valley, SoCal
Dec 3, 2011
#14
  • Dec 3, 2011
  • #14
My truck's old radiator started leaking between the tank and core last week. You know how I fixed it? I replaced it.

Stop-gap fixes usually suck. The PO of my pickup blew the head gasket and instead of fixing right, he put a $60 bottle of Blue Devil in the coolant. Not only did it fail to stop the HG leak, it clogged up the heater core and coated the rest of the cooling system with crud. Six years and an engine later I am still finding evidence of that stuff.
 

Edster

Founding Member
Aug 13, 2000
500
1
19
League City, Texas
Dec 3, 2011
#15
  • Dec 3, 2011
  • #15
This stuff is designed to get ya hpme or around until payday in my opinion. I've used several of them and wound up having to replace the part.
 

robbz28

Member
Sep 23, 2009
775
5
19
Epps, LA
Dec 5, 2011
#16
  • Dec 5, 2011
  • #16
Wow...got to get used to the new format here. Anyway, I have used "stop leak" before and ended up with several rows of my radiator being plugged up. I also nearly got a melted face because of it...I used to work at a jiffy lube in my college days and one of the duties was to check the coolant level, the car had one of those lever style caps that releases pressure, well there was no pressure, after i removed the cap I saw a huge chunk of globbed up stop leak in the radiator neck, about half a second later it blew! Got boiling hot coolant all over me, fortunately not all over my face or bare skin anywhere. Anyway 300 miles and my "pepper" is still holding up. I know that a tablespoon of pepper won't ever clog up a rad-neck.
 

65fastbackresto

Active Member
Apr 13, 2007
1,229
7
39
AR
Dec 5, 2011
#17
  • Dec 5, 2011
  • #17
My dad and grandad both used the pepper trick for temp fixes anyway. I`ve seen it work and know it works in a pinch. Bars leak is crap as far as I`ve seen, never had a good exp with that stuff.
 
K

KStang65B

New Member
Sep 9, 2006
18
0
1
Dec 5, 2011
#18
  • Dec 5, 2011
  • #18
I've never used Pepper. I've used Bar's Liquid Copper which has Sodium Silicate in it. I had a slow head gasket leak in my truck that's been leak free for 4 years since putting this in it.
 
You must log in or register to reply here.

Similar threads

S
Oil cooler delete 4v 4.6 1999 cobra mustang
  • sami12
  • Feb 24, 2026
  • SN95 4.6L Mustang Tech
Replies
5
Views
301
SN95 4.6L Mustang Tech Feb 25, 2026
GOvert
G
Fox Help
  • 93fox85
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
192
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 23, 2026
Noobz347
K
86 GT Water Pump
  • Kade5114
  • May 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
82
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 11, 2026
nickyb
Engine Themostat
  • Mindseye007
  • Jan 30, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
685
Fox 5.0 Mustang Tech Feb 1, 2026
86HO5.0
8
L
Car has been overheating. Not sure what is causing it. Any help would be appreciated.
  • Luckysgirl
  • Jun 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
89
1996 - 2004 SN95 Mustang -General/Talk- Jun 2, 2026
Luckysgirl
L
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?