PI Intake install problem

[mustanggt3685]

Hey guys,

I am installing the PI intake on my 97' and I have a few questions. First off, the hose that goes to the water pump (Pulley) is in the way of the new intake. So I basically took that off and plan to re-route it...is that right? Secondly, where exactly do I use the RTV sealant? When I am putting the gaskets on and when I put the intake in itself? Thanks:SNSign:

 

[COramprat]

Ford has a new coolent hose for that. You also need the water pump nipple.

Do you have these parts?

*Thermostat housing o-ring: F1VY-8507-A
*Heater/coolant tube: XR3Z-18B402-AA
*Water pump nipple: F75Z-8555-AA
*Water pump o-ring: F1VY-8255-A
*Alternator bracket: 1R3Z-10153-AA