Pi Intake Swap Help Asap Please

[blowbyu97]

Ok , I have some questions.

1. Should I use the PI gaskets or the NPI gaskets?

2. Everything lines up on my heads with the PI gaskets(bolt holes) but the PI gasket bolt holes do not line up with my NPI intake, how is this?

3. Those of you guys who have done this, do you put the RTV around the outside of the gasket,under it, or where?

Any help would be greatly appreciated...

 

[jamez1502]

i used the plates but i used pi gaskets plaets then non pi gaskets