• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

PI Motor in a 1996 GT

  • Thread starter Thread starter FastGTS
  • Start date Start date Apr 27, 2005
F

FastGTS

New Member
Apr 28, 2003
14
0
0
Santa Maria, CA
Apr 27, 2005
#1
  • Apr 27, 2005
  • #1
Planning to replace the motor on a 1996 GT and I figured why not go with a PI motor. What would be needed to to put a 99+ motor into a 96 car?

Thanks in advance for any help.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Apr 27, 2005
#2
  • Apr 27, 2005
  • #2
well you would need the motor itself. if you want the COP (coil on plug) ignition then you will need the 99+ pcm and wirring.
 
F

FastGTS

New Member
Apr 28, 2003
14
0
0
Santa Maria, CA
Apr 27, 2005
#3
  • Apr 27, 2005
  • #3
Yeah, I was thinking I was going to need the wiring too. Any way to do it with out the coil on plug ignition? Sorry if this is a stupid question.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Apr 27, 2005
#4
  • Apr 27, 2005
  • #4
FastGTS said:
Yeah, I was thinking I was going to need the wiring too. Any way to do it with out the coil on plug ignition? Sorry if this is a stupid question.
Click to expand...


yeah without the COP ignition you can use the coils and wires from the 96 motor.. and the 96 pcm too. you will need a tune but the swap is straight forward.
 
F

FastGTS

New Member
Apr 28, 2003
14
0
0
Santa Maria, CA
Apr 27, 2005
#5
  • Apr 27, 2005
  • #5
MikeZ28 said:
yeah without the COP ignition you can use the coils and wires from the 96 motor.. and the 96 pcm too. you will need a tune but the swap is straight forward.
Click to expand...
Ah, I see. Thanks for the help, much appreciated.
 
M

Makalani_96GT

New Member
Jun 10, 2003
159
0
0
SoCal
Apr 27, 2005
#6
  • Apr 27, 2005
  • #6
While a tune is always good, if you do it right you can get around without doing it. I did the swap and I know that you will need, if you don't get the intake with the motor you have to get the pi intake that has a hole drilled into it for you temp sensor we have two and the 2000+ cars have one. Your coil packs brackets are gonna need to be swaped and the passneger side one doesn't really fit exactly right but it will fit and be stable enough to drive. Ummm lets see there is a few more things but not much. When I did mine I started some threads just do a search and you can see what I went through. It was so worth it in the long run. I can add boost later with out too much worry like I would with a PI head swap.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Apr 27, 2005
#7
  • Apr 27, 2005
  • #7
Makalani_96GT said:
While a tune is always good, if you do it right you can get around without doing it. I did the swap and I know that you will need, if you don't get the intake with the motor you have to get the pi intake that has a hole drilled into it for you temp sensor we have two and the 2000+ cars have one. Your coil packs brackets are gonna need to be swaped and the passneger side one doesn't really fit exactly right but it will fit and be stable enough to drive. Ummm lets see there is a few more things but not much. When I did mine I started some threads just do a search and you can see what I went through. It was so worth it in the long run. I can add boost later with out too much worry like I would with a PI head swap.
Click to expand...

it is a straight forward swap. i really really recomened doing this if you have a 96-98
 

orange97

New Member
Jan 23, 2003
113
0
0
NC near Charlotte
Apr 27, 2005
#8
  • Apr 27, 2005
  • #8
ive done it too. 01 in my 97. used my coil packs and wires, no tune, straight swap... BIG DIFFERENCE
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Apr 27, 2005
#9
  • Apr 27, 2005
  • #9
orange97 said:
ive done it too. 01 in my 97. used my coil packs and wires, no tune, straight swap... BIG DIFFERENCE
Click to expand...

i am pretty sure you don't need any of the donor cars harness either. off the top of my head the only differences i can think of is the COP and the earlier 4.6 had two coolant temp sensors. and thats easyenough too fix.. just build a t fitting for both sensors into the one port for the sensor in the PI manifold
 
M

Makalani_96GT

New Member
Jun 10, 2003
159
0
0
SoCal
Apr 28, 2005
#10
  • Apr 28, 2005
  • #10
MikeZ28 said:
i am pretty sure you don't need any of the donor cars harness either. off the top of my head the only differences i can think of is the COP and the earlier 4.6 had two coolant temp sensors. and thats easyenough too fix.. just build a t fitting for both sensors into the one port for the sensor in the PI manifold
Click to expand...
My 96 motor's alternator had two connectors the oil pressure (if it is that) connector was different. Return style vs returnless fuel system. I'vtryed the T fiitting and had over heat problems IMO you should get the T-stat housing drilled and wielded for the other housing which is what I'm gonna do.
 
You must log in or register to reply here.

Similar threads

1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
591
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
C
98 gt fuel pressure issues
  • chasecollier1984
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
0
Views
79
SN95 4.6L Mustang Tech Jun 2, 2026
chasecollier1984
C
I
Engine Insane fuel trims +25% LTFT Bank 1, -16% LTFT Bank 2
  • imw_stl
  • Aug 31, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
298
SN95 4.6L Mustang Tech Sep 19, 2025
Mustang5L5
C
98 mustang keeps popping at idle like popcorn please help
  • Cannron
  • Aug 14, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
177
SN95 4.6L Mustang Tech Aug 14, 2025
squeak93
H
Electrical 2003 GT convertible battery drain
  • Huggybear56
  • May 31, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
99
SN95 4.6L Mustang Tech May 31, 2026
Bronco2fan
B
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?