Picked up my blower kit and...

[joshjwc9]

There is a couple questions I need answered regarding them. The used kit comes with a set of 8 F4SE-B1A 280150967 which apparently is the Ford 36lbers. Does that fit my '99 Mustang GT? IDK which body style this is whether it be EV1 or EV6 and if not I'll probably just buy a new set of 42's, of which I am almost sure. Also, what should the HP limit for these should I keep them and run them?

At least the kit comes with everything else, but it was off a Bullitt however.

Thanks!!

 

[Three50won]

Best way to check takes only a few seconds, go out to your car and pull a connector off one of your injectors...see if it will fit the new injector and there you go. Considering the stock bottom end, those injectors should be able to handle whatever the rods and pistons can handle safely. You should be fine with 8 lbs of boost.

 

[joshjwc9]

Thanks!

Okay, well they fit the connector. So, are these injectors the USCAR or Jetronic bodies? They are the fat style...

 

[Three50won]

What color are they? Are they the same size (physical size) as the stock injectors? If they are indeed the Ford Racing injectors then you will have no problem with their operation provided the car is properly tuned with a matching MAF sensor and they are within an 80% duty cycle...90% max. Post a pic.

 

[joshjwc9]

Dark Blue, and the part number on them match the Ford Racing discontinued numbers. IDK if the stock injectors are the fatter looking ones or not..these 36lbers are fatter ones!

 

[Three50won]

They should work fine...