I replaced my Moms during the Holiday break and took pictures to help others.
Attachments
-
P1010053.webp27.4 KB · Views: 2,876
-
P1010054.webp34.8 KB · Views: 741
-
P1010057.webp53.6 KB · Views: 562
-
P1010058.webp65.3 KB · Views: 538
-
P1010059.webp55.2 KB · Views: 602
-
P1010060.webp73.9 KB · Views: 534
-
P1010062.webp44.1 KB · Views: 545
-
P1010063.webp32.5 KB · Views: 523
-
P1010066.webp70.8 KB · Views: 520
-
P1010067.webp42.2 KB · Views: 515
-
P1010064.webp49 KB · Views: 530
-
P1010065.webp71.6 KB · Views: 524
-
P1010069.webp68.6 KB · Views: 552
-
P1010073.webp24.6 KB · Views: 562
-
P1010052.webp24.7 KB · Views: 512
zZsKyZz said:This is what I need to do if i switch to 4.10's or other rear gears.. Correct?
No. This is for replacing the gear when the Odometer stops functioning. What you need is to replace the gearing (usually in the transmission housing) to correct your speedometer and odometer.
blk9450
Founding Member
you do not need to worry about the needle placement unless you physically pull the needles off their shafts. they reset themselves
blk9450 said:you do not need to worry about the needle placement unless you physically pull the needles off their shafts. they reset themselves
Good point, this is true.
:Word:blk9450 said:you do not need to worry about the needle placement unless you physically pull the needles off their shafts. they reset themselves
And you shouldnt need to...MOst of the aftermarket gauges are made to slide over those.
RC
wytstang
Mustang Master
Your all welcome. I saw a lot of post on this topic when I was getting ready to replace my Mom's, and I thought it would be great to show what was going on. As you know... A picture is worth 1,000 words, and I thought this would be able to help alot of people.
Green 94 5.0
Founding Member
this should be added to the sticky up top. think you can merge the how to part of this thread with the how-to thread joe?
blue302stang
New Member
- Jan 23, 2006
- 61
- 0
- 0
would something like this work on the fox mustangs too, i have tried to fic everything and my speedo and odometer are still off
Blackened302
Active Member
99FiveOh
15 Year Member
I had to do this on my '95 Cobra. 'Twas a PITA working on such small parts.
Jinx, you should link to this in the tech sticky in here. Nice job.
Jinx, you should link to this in the tech sticky in here. Nice job.
urban96 said:my trip stopped working (stays at 0) but my mileage still works. any harm in that?
I don't see any harm in it, But if your like me and want everything working like it should... I can see a cluster repair in your future.
I could not find this information when I did mine and decided to do a write-up myself. Not bad for my first one either
Bugman.dave
Founding Member
89 blue lx
Founding Member
Similar threads
Interior and Upholstery
HVAC Mode selector vacuum switch issue.
- Replies
- 1
- Views
- 53
- Replies
- 1
- Views
- 62
- Replies
- 3
- Views
- 240
- Replies
- 0
- Views
- 130
- Replies
- 7
- Views
- 544