PiMPxs vs MS3 (Pro?) vs PNP MS2

a91what

SendMeUrDataLog

10 Year Member

Apr 6, 2011

10,739

6,720

214

Hillsborough county

Mar 21, 2019

#61

• Mar 21, 2019

• #61

You can literally use anything on the MS3X... just because it says MS1/MS2 does not mean it cannot be used with the MS3... If you do happen to get the zeal board and wire it in this opens up lots of possibilities... I know you have upgraded spindles does one of them have the reluctor wheel? if it does we can add a sensor to it and set you up with traction control!

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,248

17,930

224

Massachusetts

Mar 21, 2019

#62

• Mar 21, 2019

• #62

a91what said:

I know you have upgraded spindles does one of them have the reluctor wheel? if it does we can add a sensor to it and set you up with traction control!

Click to expand...

Yup, I have reluctors on all four wheels. Traction control was definitely something I wanted to try down the road.

 

a91what

SendMeUrDataLog

10 Year Member

Apr 6, 2011

10,739

6,720

214

Hillsborough county

Mar 21, 2019

#63

• Mar 21, 2019

• #63

This is also an option, it is already built and only needs to be tied in. I love the jbperf products myself.

http://jbperf.com/dual_VR/v2_1.html

 

Reactions: Mustang5L5

Blown88GT

Founding Member

Nov 13, 1999

2,283

524

164

Palm Beach Gardens, FL

Mar 21, 2019

#64

• Mar 21, 2019

• #64

a91what said:

I currently only have one cable in my stash and someone already claimed it.
The cables are simple to find and I even have all the instructions needed to repin them.

Click to expand...

I bought a Rotunda cable to be used as an extension, but it only had the 60-pin on one end & the wires weren't pinned through.
These guys make one, expensive. $200
http://www.mass-air.com/Products.htm


IST now has male-female extension harnesses for the 60 pin EEC-IV or 104 pin EEC-V computer systems!!
After years of customer requests, IST now manufactures these harnesses so you don't have to cut your original harness
if you need extra length!! These OEM quality harnesses fit virtually ALL 60-pin EEC-IV or 104 pin EEC-V computers,
including Mustangs, F150, Bronco, Thunderbird, Cougar, Crown Victoria, Grand Marquis, Town Car, Taurus, Sable, Ranger, etc.
in the 1985-95 year range (year dependant for specific models). Also great for custom engine swaps and kit cars!!
All 60 or 104 pins are extended to insure complete compatibility.
Longer lengths also available, call .

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,248

17,930

224

Massachusetts

Mar 21, 2019

#65

• Mar 21, 2019

• #65

Got steves harness.

It's a Rotunda 07-00081 and all 60-pins are populated

 

Last edited: Mar 21, 2019

a91what

SendMeUrDataLog

10 Year Member

Apr 6, 2011

10,739

6,720

214

Hillsborough county

Mar 21, 2019

#66

• Mar 21, 2019

• #66

I have the pinout for that harness if you need it.
You may have to move one pin... I think one of the injectors is not populated...

 

Steel1

Mustang Master

Aug 18, 2017

1,419

639

143

Connecticut

Mar 21, 2019

#67

• Mar 21, 2019

• #67

I thought about buying an extension harness so I could get my Pimpxs under the drivers seat
but that's a little pricey.
Currently I fabbed up a mount under the glovebox, think I'll leave it there for now.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,248

17,930

224

Massachusetts

Mar 21, 2019

#68

• Mar 21, 2019

• #68

a91what said:

I have the pinout for that harness if you need it.
You may have to move one pin... I think one of the injectors is not populated...

Click to expand...

You're right. Pin 41 and 42 on the male end are empty.

42 is injector 7

 

Black1987

my wife Bedazzled my input shaft

15 Year Member

Jan 9, 2011

1,064

595

174

NC

Mar 21, 2019

#69

• Mar 21, 2019

• #69

KZGUNS said:

@Black1987 I sent you a message to see if you want the rotunda harness. Let me know.
Thanks

Click to expand...

Idk how i missed that. I’ll let you know, I’m following to see what process Mustang5L5 goes through to see what it entails.

 

Reactions: KZGUNS

Reddevil91

15 Year Member

Mar 3, 2010

1,630

773

163

Mar 22, 2019

#70

• Mar 22, 2019

• #70

I wanna be part of PiMP crowd