I need some help!! I have a 93 Cobra with the following mods: 306/ dome top pistons (unsure of brand)/ X303 cam/ cast GT40 heads/ The pistons are hitting 2 plugs. Can anyone give any suggestions or advice. Any help is much appreciated.
when looking at the front of the motor...The 2nd cylinder from the front on each side of the block. Two plugs were closed on the previous plugs, but after running the car last night with new plugs only the 2nd cylinder on the passenger side closed. ?
im gonna take a wild guess and ask if the heads have been milled ? I have heard that if you turn the rods backwards when putting them in that will make the piston rise higher in the cylinder .......never tried that just heard that it worked ......
SOME.. domed pistons NEED a "spark plug notch" usually the mfg will notch when they are being made.. With most 5.0's being "Out of the Hole" with deck height.. you might need to remove the heads and notch the top of the dome!! cool??