B BAHRAINI_STANG Member Jan 11, 2007 69 0 7 Apr 25, 2007 #1 Apr 25, 2007 #1 for engine builder.what piston to cylinder block clearance to run with trw forged piston.opinion please
for engine builder.what piston to cylinder block clearance to run with trw forged piston.opinion please
88mouse New Member Apr 18, 2007 630 0 0 Mooresville nc Apr 25, 2007 #2 Apr 25, 2007 #2 don't really know what you are asking.Are you have a block bored if so take your pistons to the mahine shop with you and they will check the clearance when they bore it.All you should have to worry about is the ring gap.
don't really know what you are asking.Are you have a block bored if so take your pistons to the mahine shop with you and they will check the clearance when they bore it.All you should have to worry about is the ring gap.
BlooDReigN Member Feb 22, 2004 283 1 16 Calgary, Alberta Apr 25, 2007 #3 Apr 25, 2007 #3 You want to run around 6-7 thou with forged pistons usually, but it can vary by application a bit.
EMW150 Founding Member May 22, 2000 2,020 1 46 Roaring Spring,PA Apr 27, 2007 #4 Apr 27, 2007 #4 BAHRAINI_STANG said: for engine builder.what piston to cylinder block clearance to run with trw forged piston.opinion please Click to expand... That spec should come from TRW. Manufacturer's specs vary.
BAHRAINI_STANG said: for engine builder.what piston to cylinder block clearance to run with trw forged piston.opinion please Click to expand... That spec should come from TRW. Manufacturer's specs vary.