• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech

PLEASE HELP with alarm system!

  • Thread starter Thread starter moosewilsn
  • Start date Start date Aug 17, 2005
M

moosewilsn

New Member
Aug 17, 2005
17
0
0
Aug 17, 2005
#1
  • Aug 17, 2005
  • #1
My alarm system on my '96 V6 mustang convertible goes off when the car is wet. It first did it when I went through a car wash. Now when it rains, it goes off for at least a few days till I guess it dries out - thank goodness we have had a drought this summer, or the car would be useless. This absolutely only happens when it's wet. I have taken the horn out so my neighbors wont shoot me. After that, I just have to disconnect the battery, or it will flash till the battery is dead. Maybe another few dry days, and I'll be able to drive it again.

I would disconnect the alarm system alltogether, but I have heard that I can't cuz it is hooked up to the fuel pump.

HELP!!
 

SDstangz

New Member
May 30, 2004
40
0
0
Texas
Aug 21, 2005
#2
  • Aug 21, 2005
  • #2
Dude just unplug it, its under the dash driver side dissconnect the whole harness to the alarm, if its a stock ford alarm it will stop bypassing all theft deterrants. Thats how they stripped my car, then i went and got a viper alarm. Water is probably shorting somthing in your alarm system like a door or hood trigger. Look at how many times the light blinks and that should tell u if it was a door/hood/trunk trigger or impact or electrical draw. Good luck
 
M

moosewilsn

New Member
Aug 17, 2005
17
0
0
Sep 16, 2005
#3
  • Sep 16, 2005
  • #3
Alarm System - how do I unplug it!

Thanks for the input. It's been a dry season, and I've been unplugging various things under the drivers dash to try and figure out what to unplug. Guess if I was a car thief it would be fixed!

Can you give me a clue as to what to look for - which wire or plug, near something, some kind of reference?

Thanks,

Chris
 

timeless2

Vi Veri Veni Versum Vicus Vici
Admin Dude
Nov 29, 1999
1,366
202
154
the Shadow Gallery
Sep 16, 2005
#4
  • Sep 16, 2005
  • #4
Look for wiring around/near your power relay or ignition switch under the hood.
Also, there might be a module wired up underneath the dash somewhere. Check wires with a multimeter to tell which one is hot, so you aren't unplugging things just for the smell of it.
 
M

moosewilsn

New Member
Aug 17, 2005
17
0
0
Sep 18, 2005
#5
  • Sep 18, 2005
  • #5
Thanks - still having trouble finding it this wire/module, or whatever, both under the hood, and under the dash. I've sure found everything else. I have a Haynes repair manual, but not much help.
 

timeless2

Vi Veri Veni Versum Vicus Vici
Admin Dude
Nov 29, 1999
1,366
202
154
the Shadow Gallery
Sep 19, 2005
#6
  • Sep 19, 2005
  • #6
do you have any idea who the manufacturer is at all?
 
M

moosewilsn

New Member
Aug 17, 2005
17
0
0
Sep 25, 2005
#7
  • Sep 25, 2005
  • #7
I'm pretty sure it's the stock Ford unit. I have keyless entry, and the only way I can get it to turn off (temporarily) is to press "unlock". that turns off the flashing lights, etc., and then I can start the car (if I'm quick about it!) it's off for a bit (sometimes 2 seconds, sometimes 5 minutes, and everywhere in between) and then it's alarm time again. I'm just getting good at disconnecting the battery and hoping it dries out. Unfortunately, it's getting to be rainy around here, so I can't even drive it.
 
M

moosewilsn

New Member
Aug 17, 2005
17
0
0
Oct 2, 2005
#8
  • Oct 2, 2005
  • #8
where is the lousy connector to this $*&@!* alarm system!!!!

I have some freinds who have been trying to help me find the mystery connector. I have the shop manual pages from another friend which tells me diagnostics of how to find what's shorting out, or whatever, which would be great.....EXCEPT....I CAN'T FIND THIS LOUSY CONNECTOR(s)!!!!

CAN SOMEBODY HELP!!!!
Anti theft alarm control module connector C-1 (N13328-A),

the other side of this connector

Anti theft alarm control module connector C-2 (N13329-A),

and some other connector

Anti theft alarm control module connector C-3 (N12642-A), http://forums.stangnet.com/misc.php?do=getsmilies&wysiwyg=0&forumid=10#

I COULD CARE LESS IS SOMEONE STEALS THE CAR, AS LONG AS IT DOESN"T GIVE ME FLASHING LIGHTS WHENEVER IT GETS HUMID OR WET.

PLEASE....SOMEONE HELP!!!! http://forums.stangnet.com/misc.php?do=getsmilies&wysiwyg=0&forumid=10#
 
M

moosewilsn

New Member
Aug 17, 2005
17
0
0
Oct 13, 2005
#9
  • Oct 13, 2005
  • #9
Alarm System - how do I unplug it!

SDstangz said:
Dude just unplug it, its under the dash driver side dissconnect the whole harness to the alarm, if its a stock ford alarm it will stop bypassing all theft deterrants. Thats how they stripped my car, then i went and got a viper alarm. Water is probably shorting somthing in your alarm system like a door or hood trigger. Look at how many times the light blinks and that should tell u if it was a door/hood/trunk trigger or impact or electrical draw. Good luck
Click to expand...



Exactly where on the dash driver side is this "plug". I'd love to unplug it! The Ford dealer I took it to (and told them, fix it if you can, and disconnect it if you can't fix it!) didn't know how either. The tech says "I've never worked on this kind of system (FORD "active" alarm system rather than the "passive" alarm used later). If you (OR ANYONE) can tell me where exactly I can unplug this you-know-what...I would be eternally grateful!
 
M

moosewilsn

New Member
Aug 17, 2005
17
0
0
Oct 13, 2005
#10
  • Oct 13, 2005
  • #10
alarm System - how do I unplug it!

git-it-83 said:
do you have any idea who the manufacturer is at all?
Click to expand...

Yes, it's the stock FORD system - the dealer told me it was an "Active" system.
 
M

moosewilsn

New Member
Aug 17, 2005
17
0
0
Oct 13, 2005
#11
  • Oct 13, 2005
  • #11
alarm System - how do I unplug it!

git-it-83 said:
Look for wiring around/near your power relay or ignition switch under the hood.
Also, there might be a module wired up underneath the dash somewhere. Check wires with a multimeter to tell which one is hot, so you aren't unplugging things just for the smell of it.
Click to expand...


When you say "ignition switch under the hood" - where exactly is that? on the firewall near.....what. I am just unplugging things for the smell of it as a process of elimination. So far, I've eliminated everything else!

Thanks for any help!!!

 
You must log in or register to reply here.

Similar threads

B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
485
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
A
95 GT parking brake instrument cluster light trouble
  • Aroenias
  • Jun 23, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
207
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 24, 2025
Mustang5L5
L
Help with 1986 GT 5 Speed Please
  • Lcasada1999
  • Mar 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
183
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 21, 2026
General karthief
Electrical Issues with my 2006 mustang gt
  • VerneVdV
  • May 22, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
36
2005 - 2009 Specific Tech May 22, 2026
VerneVdV
A
Resolved Electrical Help Please
  • Alabama
  • Jan 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
245
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 22, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?