• Community Forums
  • The Welcome Wagon

Please Help

  • Thread starter Thread starter 97 stang 4.6
  • Start date Start date Oct 12, 2015
9

97 stang 4.6

New Member
Oct 11, 2015
3
0
1
Oct 12, 2015
#1
  • Oct 12, 2015
  • #1
OK I have two problems one mechanical one with wiring.

First off I have a 1997 4.6l 2v sohc with aluminum cross over pipe, the car is over heating. I bought car and drove 29 miles on highway and it only over heated a Lil about 3/4 of the trip I pulled over and let cool down a bit then got back on highway and turned the vent on to hot and never got out off normal rest of the way home. Next day took a drive maybe 3 miles and it started get higher then normal so let it cool and filled up resivor on top of radiator, I drove it 5 or 6 miles and temp started rising so I got home and coolant was burping out of the resivor cap. The cooliant isn't mixing with oil I checked, and i dont smell cooliant burning out exughst so dint think its head gasket, not loosing any power, I ve read about air getting trapped in system so wanted second opions. If there is a good way to burp the system I m up for suggestions, I be heard of filling up the resivor while cold, squeeze top house till bubbles are out, start car let idle and turn heater on fun blast

2 my driver side break light isn't coming on when pressing break passenger side is and both come on when headlights are on. I be changed bulbs, so wondering if its just bad wiring or what, I m some what mechanically inclined so I can probably handle it with good advice.
 

Pantera2013

Member
Sep 29, 2015
126
5
18
Kansas
Oct 19, 2015
#2
  • Oct 19, 2015
  • #2
Head gasket maybe. Check for leaks in radiator and hoses first.
 

Cobra42898

Member
Jun 23, 2015
47
9
18
Gouldsboro, PA
Oct 19, 2015
#3
  • Oct 19, 2015
  • #3
stuck thermostat maybe? id just change it to be safe, and do a leakdown test to see if the hg's are failing.
 

caliber92

Active Member
Mar 30, 2015
202
25
48
Oct 22, 2015
#4
  • Oct 22, 2015
  • #4
Start with checking those hoses and any leaks, inconsistent flow can easily affect the temp.
 
You must log in or register to reply here.

Similar threads

J
Engine Stalling
  • josh40tay
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
197
Fox 5.0 Mustang Tech Oct 21, 2026
JD1964
Engine Coolant boiling in hose?
  • Teen'93stang5.0
  • Jun 3, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
335
Fox 5.0 Mustang Tech Jun 8, 2026
Mustang5L5
L
Car has been overheating. Not sure what is causing it. Any help would be appreciated.
  • Luckysgirl
  • Jun 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
246
1996 - 2004 SN95 Mustang -General/Talk- Jun 2, 2026
Luckysgirl
L
H
97 cobra maf sensor help
  • Hopper1979
  • Oct 16, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
154
1996 - 2004 SN95 Mustang -General/Talk- Oct 17, 2026
CAMTWO1070
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
675
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
Share:
Bluesky Email Share Link
  • Community Forums
  • The Welcome Wagon
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?