pod gauges

If you want to hook the fan up to a switch just do a search for fan switch and you'll find what wire you need to tap into

The A/F mixture gauge is a waste of money.. it's just a light show. The only one worth it is the wide-band type.

The oil pressure gauge, just find the stock oil pressure sender and run a t-fitting or an elbow fitting if it has an auxillary plug somewhere near it. Same with the water temp.. just elbow or tee off the original sender. I don't know that motor so I can't tell you the exact locations offhand. Try searching through the forums or google and you may find something.

I guess I would be tracing down the fan wiring first before I order gauges, but that's just me.

And for the wiring of the gauges, buy those fuse tap things from autozone, that way you just run off the factory fuses and don't splice in to any wiring (unless you prefer to, in which case just pick whatever ignition-on power wire you can find.) The light wire you'll also have to search for in the forums or google.

http://forums.stangnet.com/showthread.php?t=544455&highlight=pressure

That should help, It helped when I was installing mine...