• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Posi is toast?

  • Thread starter Thread starter Andres2882
  • Start date Start date Oct 26, 2005
A

Andres2882

New Member
Jan 29, 2004
316
0
0
Oct 26, 2005
#1
  • Oct 26, 2005
  • #1
Ok, here's the scoop.

I got my 3.73s in probably about a year ago. I recall being very impressed with my hard launching and whatnot. That day, I took the car to the track. When I launched, I really felt that seat of the pants kick, but also the sound of something like glass shattering. amnit: Basically it felt like something shattered. Now, I was thinking oh nuts, I just really toasted something. But the car drives fine, I've just never really felt that same kick.

With a buddy holding one of my tires, I can fairly easily spin the other rear tire. crapola So my question is this, is it likely that I managed to toast my posi that night? I now get really terrible spinnage, can't launch over 2kish rpms, but the car drives fine. Any ideas?
 

sirr0bin

New Member
Jul 18, 2003
174
0
0
Winnipeg, Manitoba
Oct 26, 2005
#2
  • Oct 26, 2005
  • #2
could be the posi

spin the tires, if you only see one blackie, or one dark and one light blackie, your trak-lok is probably toast
 

rd

Founding Member
Jan 12, 2000
3,316
63
109
Ocean Springs MS
Oct 26, 2005
#3
  • Oct 26, 2005
  • #3
Sounds like the posi clutches lost their tangs that engage the diff case or the splines of the side gears. If this is it, it will drive fine, just like an open diff.

However, it will have pieces of clutch sloshing around in the oil.

I would jack it up, pull the cover and inspect it asap. If nothing else, clean out the broken stuff, and put it back together until you can fix it.

If the clutch debris gets in the ring and pinion, it will break off a tooth or damage something.

I had clutch debris in the bottom of my 8.8 that I bought, but it did not seem to hurt anything. I fixed it before installing it though.
 
A

Andres2882

New Member
Jan 29, 2004
316
0
0
Oct 27, 2005
#4
  • Oct 27, 2005
  • #4
Thats generally what I was thinking. Cause I swear something shattered back there, but thought it was just me hearing things since the car drove fine. Thanks for the input.
 
You must log in or register to reply here.

Similar threads

Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
882
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
517
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
840
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
C
Help with manual conversion
  • CPH89LX
  • Aug 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
705
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 27, 2026
2000xp8
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?