Possible Fuel Injection for 67 289?

[Iluvmy67HT]

I'm the new kid on the block, I've got a 67 Ca. Special that I'm going through end to end, and I was wondering if anyone has ever thought about going from a carborator to fuel injection on a 289, if so can you suggest some sites that I migh visit to get an idea on prices? I think I want something more stable then having to worry about my carb going out on me. Or a suggestion on a good carb for my motor.

 

[rbohm]

ok you have a number of ways to go here;
1: you can adapt the efi system from a late model 5.0 if you go this route you need to either change the cam to a 5.0 or 351w style cam, or change the injector firing order.
2: you can use one of the many aftermarket systems on the market today from holley, edelbrock, etc. you can get a wiring harness from painless, street and performance or windsor fox that will let you use the 5.0 computer in a custom harness.

any of these options are viable ones, but i would read up on efi before you attempt to install any system. charles o probst wrote two excellent books on fords efi systems, get them and read them.

 

[88 Fox GT]

rbohm is correct. You gotta read up and do some searches on how this installation is done. There's a lot of stuff to know. Trust me, I know. I'm well on the way of of completion on my 65 EFI project.

 

[Tubo(2-bo)]

If you want know about EFI for your Early Stang I highly reccommend you study this site http://fordfuelinjection.com/
Especially read the set of "magazine articles" in the navagation area. They are about EFI into a Bronco, but relate directly to any early Mustang

 

[rhyno9]

I was wondering if anyone has ever thought about going from a carborator to fuel injection on a 289

Check out the link below.

http://mustangsplus.com/tech/efi/index.html