Post pics of how your foxbody currently sits

Steel1 · Mar 24, 2019

Mustang5L5 said:
Well, was going to pull it out of the garage, and start tinkering on the alignment and take it for a drive....

Then it snowed overnight. So we wait

Well it's spring according to the calendar...stupid groundhog.

deathb4dismount · Mar 24, 2019

Steel1 said:
Well it's spring according to the calendar...stupid groundhog.

@Steel1 and @Mustang5L5 you guys better get out there today. It's gorgeous and I'm stuck at work.

Steel1 · Mar 24, 2019

deathb4dismount said:
@Steel1 and @Mustang5L5 you guys better get out there today. It's gorgeous and I'm stuck at work.

I did get out for a quick burst today !
Roads still look like the surface of the moon but heavy rain Friday a.m. washed the ice melt away.

Mustang5L5 · Mar 24, 2019

deathb4dismount said:
@Steel1 and @Mustang5L5 you guys better get out there today. It's gorgeous and I'm stuck at work.

I got it out. Adjusted my coil over suspension, set my camber and working on toe.

Went around the block and realized I never torqued the lug nuts! So my ride was cut short.

So quick ride. Really impressed at how well the coil overs ride. Truely does ride like a different car!

lemosley1973 · Mar 24, 2019

God bless, that car looks good.

stanglx2002 · Mar 24, 2019

Mustang5L5 said:
I got it out. Adjusted my coil over suspension, set my camber and working on toe.

Went around the block and realized I never torqued the lug nuts!

So quick ride. Really impressed at how well the coil overs ride. Truely does ride like a different car!

What tools do you use to do your alignment?

Rdub6 · Mar 24, 2019

Mustang5L5 said:
I got it out. Adjusted my coil over suspension, set my camber and working on toe.

Went around the block and realized I never torqued the lug nuts!

So quick ride. Really impressed at how well the coil overs ride. Truely does ride like a different car!

And the Ariens gets a quick cameo in pic 2! Gotta love those machines!

Mustang5L5 · Mar 24, 2019

stanglx2002 said:
What tools do you use to do your alignment?

This tool here for Caster and Camber, although I'm pretty much running full back Caster on the mm C/C plates.

https://www.google.com/amp/s/www.hotrod.com/articles/diy-wheel-alignment-new-tools-tested/amp/

For toe, I made a stick that I use to measure fromt and rear of tire.

I had to tracking dead straight at 80mph last summer

Mustang5L5 · Mar 24, 2019

Rdub6 said:
And the Ariens gets a quick cameo in pic 2! Gotta love those machines!

Love it this winter, although we got less snow that usual. But it's just such a beast!

Changed the oil on it today and got it ready for summer storage

BlakeusMaximus · Mar 24, 2019

Mustang5L5 said:
Love it this winter, although we got less snow that usual. But it's just such a beast!

Changed the oil on it today and got it ready for summer storage

I’m glad I’ll never have to invest in one of those. How much do those cost anyways?

Olivethefet · Mar 24, 2019

Car looks great. I am so glad I live in the south and have never had to use one of those!

Mustang5L5 · Mar 24, 2019

BlakeusMaximus said:
I’m glad I’ll never have to invest in one of those. How much do those cost anyways?

There are cheaper ones but I wanted the bigger engine

https://www.ariens.com/en-us/snow-products/snow-blowers/platinum/platinum-30-sho

Worth every penny

Rdub6 · Mar 24, 2019

Mustang5L5 said:
There are cheaper ones but I wanted the bigger engine

https://www.ariens.com/en-us/snow-products/snow-blowers/platinum/platinum-30-sho

Worth every penny

I went with this one:
https://www.ariens.com/en-us/snow-products/snow-blowers/deluxe/deluxe-24

But as 5L5 says, they are worth every penny. Would have bought one a few years earlier had I known how nice they were!

Kabuki_notch · Mar 25, 2019

lots of work to do....

BlakeusMaximus · Mar 25, 2019

Rdub6 said:
I went with this one:
https://www.ariens.com/en-us/snow-products/snow-blowers/deluxe/deluxe-24

But as 5L5 says, they are worth every penny. Would have bought one a few years earlier had I known how nice they were!

Im lucky. If it snows here it melts by lunch time.

Mustang5L5 · Mar 25, 2019

BlakeusMaximus said:
Im lucky. If it snows here it melts by lunch time.

THats just called March here

Wayne Waldrep · Mar 25, 2019

Been looking thru this thread. All of your cars are very nice. I've avoided posting any picture of my car with the paint so far gone. Oh well. I washed all the pollen off yesterday and at least it's clean now. Just about all the clear coat is gone but it's a solid car. I've had it so long it feels like a family member.

BlakeusMaximus · Mar 25, 2019

Wayne Waldrep said:
Been looking thru this thread. All of your cars are very nice. I've avoided posting any picture of my car with the paint so far gone. Oh well. I washed all the pollen off yesterday and at least it's clean now. Just about all the clear coat is gone but it's a solid car. I've had it so long it feels like a family member.

So you have a Cobra and a 1988 GT? Or is it a GT dressed as a cobra? Either way, I like it.

Wayne Waldrep · Mar 25, 2019

Oh...No it's one in the same. I bought a left over Cobra back then and took every remaining piece off of it. There was no Cervini kit at the time so all of it is Ford part numbered parts. I took it completely apart and color changed it to Vibrant Red. Thanks.

Barron91lx · Mar 25, 2019

Newskool, I like your wheels

Post pics of how your foxbody currently sits

Mustang Master

Crap, didn’t realize my crotch was in that picture

Mustang Master

That is…until I whipped out my Bissell

Doing something with a heavy tranny now

CT Material here

So while I wait to figure out my rear end issues

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

Still got to try a little lube on my speedo head

I will own your nuts! LOL

That is…until I whipped out my Bissell

So while I wait to figure out my rear end issues

Attachments

Still got to try a little lube on my speedo head

That is…until I whipped out my Bissell

Before I post a pic, do you have one of yours?

Still got to try a little lube on my speedo head

Before I post a pic, do you have one of yours?

Member

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency