Post pics of how your foxbody currently sits

David Pepiton · Dec 8, 2012

Way2QWK said:
here is a few from today

where in Tucson are you?

Way2QWK · Dec 9, 2012

those pics are on a side road next to the airport TIA.

Jamieray · Dec 10, 2012

1992 LX Conversion in progress

Jredline1984 · Dec 11, 2012

Joined awhile ago, haven't posted much. Here is my latest project, a 1980 Cobra.

New fender and air dam on:

GroverDill · Dec 11, 2012

View attachment 138190

88LX5.Oh · Dec 11, 2012

Jredline1984 said:
Joined awhile ago, haven't posted much. Here is my latest project, a 1980 Cobra.

New fender and air dam on:

Make your own thread please I love 4 eyes and want to see more of this car lol

Sharad · Dec 12, 2012

GroverDill said:
lol no videos, when its on the dyno I have to sit in the back otherwise it spins the tires on the dyno.

I was worried about that too, because mine's only on 275s, but they put this strap around my chute mount and strapped the back end down about half an inch or more. It didn't spin at all! It's still pretty terrifying to watch how much the car moves with it anchored in 6 places.

Jredline1984 · Dec 13, 2012

88LX5.Oh said:
Make your own thread please I love 4 eyes and want to see more of this car lol

Lol, I will try to find some time to make one in the near future. Haven't done much to it since that pic but I can upload some pics of the 351C I'm building for it. Been busy restoring that F150 in the corner of the pic.

stangman11 · Dec 13, 2012

Some fall crusing this year

88LX5.Oh · Dec 13, 2012

Jredline1984 said:
Lol, I will try to find some time to make one in the near future. Haven't done much to it since that pic but I can upload some pics of the 351C I'm building for it. Been busy restoring that F150 in the corner of the pic.

76ish F150?
And Clevelands are badass. I want to build a Clevor so bad

Cory Berg · Dec 15, 2012

Got some new rubber for her

Twin44KoH · Dec 15, 2012

This thread has made me rather envious of some people's Mustang's. Hopefully mine will be that awesome at some point. As of now, I'm at the starting point as I just bought it only two weeks ago.

View attachment 137962
Untitled by jmbohizic, on Flickr
View attachment 137964
Untitled by jmbohizic, on Flickr

Awaiting the removal of the transmission. H-pipe, starter, and driveshaft are all out and pretty much all else in unbolted except the rear mount, the bellhousing, and the torque converter. Hopefully that little turd comes out and in goes the low mileage AOD and 2500 stall converter next weekend. Throughout the week I'll be replacing the Quarter mindow mightmare too. Wish me luck folks!

93project · Dec 15, 2012

GroverDill said:

Nice! Too bad the magazine has shifted most of its focus to s197... I love seeing a nice fox in there each month but not worth the subscription. Good job getting your baby in that mag!

Cory Berg · Dec 15, 2012

Twin44KoH said:
This thread has made me rather envious of some people's Mustang's. Hopefully mine will be that awesome at some point. As of now, I'm at the starting point as I just bought it only two weeks ago.[\Quote]

What rims are those? I really like them

jamse-r · Dec 16, 2012

gearheadboy · Dec 16, 2012

jamse-r said:

Sure are a lot of Stangs in that pic.

jamse-r · Dec 16, 2012

One more with my best friend and his 88 Saleen.

Jredline1984 · Dec 17, 2012

88LX5.Oh said:
76ish F150?
And Clevelands are badass. I want to build a Clevor so bad

She is a '79 but has the grill from a 77 and the rest of the body is off of a 76 so good eye!

I love Clevelands and the rest of the 335 series engine family which is why I stuck with the 351M in the truck. I used the 2V heads from the Mustang's cleveland after I sourced some 4V heads.

I do have to say I love everyone's stangs. Had an 88GT that I converted to carb years ago and then sold that after I purchased a '94 SVT Cobra. I miss that car.

David Pepiton · Dec 17, 2012

5 lug stuff... almost there:

5 months ago:

wife bought me new head lights and I hit the car with some rubbing compound and polishing compound though it was about 2 weeds ago and its not looking nearly as it did when polished it.

93project · Dec 17, 2012

David Pepiton said:
5 lug stuff... almost there:

5 months ago:

wife bought me new head lights and I hit the car with some rubbing compound and polishing compound though it was about 2 weeds ago and its not looking nearly as it did when polished it.

Nice! Oreilly brake fluid and masterpro gear lube! Don't forget to buy friction modifier. As far as i know, The only oil we(Oreilly) sell that has modifier in it is royal purple.

Post pics of how your foxbody currently sits

Active Member

Member

New Member

Member

Attachments

GoldMember

Attachments

ALWAYS choose the V over the P!!! Wait... what?

Member

Member

Attachments

Active Member

Attachments

New Member

Active Member

Attachments

Active Member

Member

Member

Member

Active Member

Attachments

Active Member

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency