Post pics of how your foxbody currently sits

[Kabuki_notch]

What MC/ Brake booster are you using?

I went with the 94/95 GT

 

[mikestang63]

at the show today

 

[Rdub6]

I don’t drive this in the rain, and rarely wash it with the hose (usually just use the spray detail). But after washing my daughter’s car and the wife’s car, I decided to give it the once over.
I have so much wax on this thing, the water just falls off, so it’s a pretty easy job!! All ready for spring (except that inspection sticker that reads 12/22. Oh well!

 

[mikestang63]

Coming to a Mustang near you. Major score today. Going to have them hot tanked and polish the upper, and replace my explorer upper.

 

[Mindseye007]

My goal for ‘22 was to not spend any money on this car. Made it 3/4 of the way. GD water pump took a and died. I just replaced it last winter, too. I think I’m going to have to drop some coin on a water pump that’s actually worth a damn. Maybe the Edlebrock?

did you get the Edelbrock yet?

 

[ThinBlue502]

did you get the Edelbrock yet?

Yessir, sure did. It hasn’t died yet. Just did head gaskets and studs. I want to boost it next. That’ll probably take awhile.

 

[Mindseye007]

Yessir, sure did. It hasn’t died yet. Just did head gaskets and studs. I want to boost it next. That’ll probably take awhile.

do you have a pic of it installed?'

 

[TOOLOW91]

 

[Jersey Joe]

 

[Mr_chips]

New here.. Got my 79' Cobra about a month ago. Been getting some odds and ends tied up before body work. Had to lengthen the steering shaft, since it had the incorrect one. Fixed the drivers side rear quarter. Got the shifter hump in for the T-5 swap, and today I pulled the front fenders.

 

[91AOD5.0LX]

New here.. Got my 79' Cobra about a month ago. Been getting some odds and ends tied up before body work. Had to lengthen the steering shaft, since it had the incorrect one. Fixed the drivers side rear quarter. Got the shifter hump in for the T-5 swap, and today I pulled the front fenders.

Welcome! Nice work!

 

[ThinBlue502]

do you have a pic of it installed?'

I just saw that you asked this. You can’t see much of it installed, but here you go.

 

[91AOD5.0LX]

The weather is finally warming up in NY and I jumped on the opportunity to drive today.

 

[Mindseye007]

very sweet Ride!

 

[Mindseye007]

I just saw that you asked this. You can’t see much of it installed, but here you go.

what rear gears?

 

[Mustang5L5]

Waiting for a brake line fitting. In the meantime it seems I’ve gone and got myself another project

 

[flynndawg]

pics of how your foxbody currently sits

 

[mikestang63]

Installed the mach 1 front splitter and ( putting on flack jacket) removed the non working A/C. Car runs cooler and cleaned up the engine bay

 

[mikestang63]

Ortiz Polishing finishing up on my GT40 intake, Can't wait to see this on the car. The guy does amazing work

 

[91AOD5.0LX]

Ortiz Polishing finishing up on my GT40 intake, Can't wait to see this on the car. The guy does amazing work

That is absolutely amazing!!! Wow!!!! Follow up with pics when that masterpiece is installed! Nice!!!!