Post your pics of Mad Maxed, Rat Rodded, Beaters, Apocalyptic Stangs

Sicarius428 · Jun 25, 2007

What are the offset you are using in the rears for those wheels? I only have a couple parts needed to swap my 03 IRS into my Fox. Do you have room for a wider wheel? If yours is an 03/04 where did you find the driveshaft flange to mate up to the pinion flange. I can't find one anywhere.
Kevin

bstrd86 · Jun 25, 2007

The rear wheels are 17x9 +35 (6.42 b.s., same as the m179 cobra R). I had to roll the lips alot to get them to fit. You might squeeze a 10" wheel under there with a button head bolt for the rear of the cradle but it would be a custom built wheel. The rear is an '04 unit, you can use an 8.8 pinion flange or the rear yoke off of an Explorer with the right u-joint.

mustangjoe87 · Jun 25, 2007

not a stang but you get the idea

View attachment 379797
View attachment 379798
View attachment 379799
View attachment 379800
View attachment 379801

68stang351 · Jun 26, 2007

Does this count? Since then I have re shot the hood in flat black. The car was black primer, its faded out to grey now.

Strype · Jun 26, 2007

SVT32VDOHC · Jun 26, 2007

Strype said:

Where can I buy that trick suspension set up on the red mustang???

Busted07 · Jun 26, 2007

~FrankenStang~ said:
AAAAAAAAAAAnyway...............

Mine shall be joining the ranks of the Mad Max inspired Foxes soon. It's going black (hopefully) in the next few weeks.

Behold, the glory of my abomination....

View attachment 379705

Damn you and your negative attitude on your car !!!!!!!!!!

Get some nice wheels, some springs, and a paintjob... that car will be SEKSI!!!!!

FrankenStang · Jun 26, 2007

FBD said:
Damn you and your negative attitude on your car !!!!!!!!!!

Get some nice wheels, some springs, and a paintjob... that car will be SEKSI!!!!!

Sorry. LOL

Springs? Why? Rims? What kind?

....and thank you for the compliment.

FrankenStang · Jun 26, 2007

.... I can't believe Darkwriter77 hasn't posted pics of his Notch yet...

It looks kinda Mad Maxish to me. Well, it did with the black 10 holes... He's got Ponies now.

Darkwriter77 · Jun 26, 2007

I gotta dig up the original pic of my Notch, from the Autotrader ad. It was friggin' hideous looking when I first picked it up. I still get a chuckle out of my ex's reaction upon first seeing it:

Her: "You paid $2,000 for THAT?!? "
Me: "B-but ... i-i-it's a notch!"
Her: "You paid ... $2,000 ... for THAT. "
Me: "But it's a NOTCH!"
Her: "I'll never understand you."
(This coming from the chick that LITERALLY had over fifty different pairs of shoes, and STILL always whined that she didn't have any "good" shoes to wear to work. )

It's all of the little things like that which added up to her becoming my EX.

Busted07 · Jun 26, 2007

~FrankenStang~ said:
Sorry. LOL

Springs? Why? Rims? What kind?

....and thank you for the compliment.

Is it already lowered? Its kinda hard to tell in that pic. I would just get some bigger rims (17's) in anything but a cobra r, something like this: http://www.americanmuscle.com/17x9-2003-cobra-4lug-chrome.html and tires with a little less sidewall. im not sure if they are or not, but your tires kinda make your rims look like 15"

if i had a side shot of your car and photochop skills, id make ya se what i see out of your car.

FrankenStang · Jun 26, 2007

Holy romped into the ground Notch Batman!

That thing has come a LOOOOOOOOOOOONG way...

FrankenStang · Jun 26, 2007

FBD said:
Is it already lowered? Its kinda hard to tell in that pic. I would just get some bigger rims (17's) in anything but a cobra r, something like this: http://www.americanmuscle.com/17x9-2003-cobra-4lug-chrome.html

if i had a side shot of your car and photochop skills, id make ya se what i see out of your car.

Yeah, it's been lowered. My X cut the springs so, yeah, I probably need new springs anyway.

Those are nice rims. Too bad I'll never be able to afford any.

Darkwriter77 · Jun 26, 2007

Yeah ... the damage done to my credit card reflects how far it's come.

FrankenStang · Jun 26, 2007

But..... but..... It's a NOTCH!!

Busted07 · Jun 26, 2007

~FrankenStang~ said:
Yeah, it's been lowered. My X cut the springs so, yeah, I probably need new springs anyway.

Those are nice rims. Too bad I'll never be able to afford any.

I edited while you posted...

if you have any side shots of your car, send them over to me.

FrankenStang · Jun 26, 2007

I'll see if I've got any...

FrankenStang · Jun 26, 2007

View attachment 379698

Dammit, why do I always have to park with my wheels turned.

KAILUAZ · Jun 26, 2007

Nice to see the beaters out there,, makes me feel better about mine!! Keep them coming!!!

Sicarius428 · Jun 26, 2007

bstrd86 said:
The rear wheels are 17x9 +35 (6.42 b.s., same as the m179 cobra R). I had to roll the lips alot to get them to fit. You might squeeze a 10" wheel under there with a button head bolt for the rear of the cradle but it would be a custom built wheel. The rear is an '04 unit, you can use an 8.8 pinion flange or the rear yoke off of an Explorer with the right u-joint.

Thank you for the info on the wheels. It will be a while before I can buy a set of wheels so I have some time. I found the U-Joint adapter everywhere but not the flange. Thanks for the tip. Was it any particular year explorer?
Kevin

Post your pics of Mad Maxed, Rat Rodded, Beaters, Apocalyptic Stangs

Active Member

New Member

Member

Cuthbert catcher

waiting for the next hack atta

I need my gorilla to be about an inch longer.

Now, give me a damn CT!

Now, give me a damn CT!

Resident Ranting Negative Nancy

I need my gorilla to be about an inch longer.

Now, give me a damn CT!

Now, give me a damn CT!

Resident Ranting Negative Nancy

Now, give me a damn CT!

I need my gorilla to be about an inch longer.

Now, give me a damn CT!

Now, give me a damn CT!

New Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency