Power Bond Balancer User's. Check TDC Markings!!

For those with a Power Bond balancer, you might check yours.

I ligned up TDC and this is how my timing marks came up on the stock pointer. I used a pic of a stock balancer to show the diff.

Going to install my adjustable timing pointer to correct this.

Hope this helps some of you

Balancer Markings


Take Care,
Scott

tmoss said:

Holy cr** - that is WAY off. Think about what some poor guy who didn't check would experience. How could it be that far off?

Click to expand...

my thoughts exactly. imagine how much power I was missing setting the timing at 10* using the top mark?

Tommorrow on goes the adj timing pointer. Looking forward to that extra HP & TQ

as for why it could be that far off?, well all companies do make error's at times. I also read a while back when these first became popular and I remember a couple posts where a few said theirs were off by 11*, so after cranking another 5* advance into mine and still had no ping, I decided to double check it.

Tom, this is why I made this post as many people use this balancer and wanted them to make sure to check theirs.. Maybe I got unlucky, I don't know, but it doesn't take long to check it.

Take Care,
Scott

Timing marks were 10* off

Just finsied up installing my adj timing pointer with the help of a buddy. WOW what a diff we figured the marks on the Balancer were off by 10*, so I was actually running at 0* rather than 10* BTDC once everything was all lined up perfectly.

Just thought i'd share what my final results came out to be.

Take Care,
Scott