Power junction block

[DemonGT]

Was thinking of adding a power junction block so i have a place to connect for different accessory's.

Looking for ideas on which one to buy and where to place it.

 

[Mustang5L5]

I used this to delete my starter solenoid. I mounted it inside the fender

$8….shipped

GM Distribution Block - WARR Performance LLC

These were used on GM full sized trucks and were meant to handle the full alternator output as well as provide battery power to everything but the starter, so they can handle a good amount of current. They’re great for use on projects where you have a lot of accessories that require power or...

warrperformance.com

 

[Bullitt347]

I use one of these in my racecar

Amazon.com : blue seas systems fuse block

 

[evintho]

$5 @ Pick-N-Pull. Off an '01-'05 VW. Just sayin'.

 

[90sickfox]

I got mine from a couple late 80s - mid 90s chevy trucks. They are located at the top of the firewall under a plastic cover that runs along the passenger side. Works very well and is about the same as the one posted up top.

 

[KRUISR]

When I did my Contour fans I used the Contour fuse block with the relays. It gave me some spare fused circuits as well.

 

[96pushrod]

I’ve always been a fan of the bus bars you can buy off Amazon, then running a 80a relay to the feed lug to put the whole thing on switched 12v.