• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Power Loss when warm :/

  • Thread starter Thread starter Synned
  • Start date Start date Sep 25, 2005
S

Synned

took tubgirl on a date and got banned
Mar 31, 2005
991
1
0
Philly
Sep 25, 2005
#1
  • Sep 25, 2005
  • #1
My car feels like a slug when it gets hot and I try to take off. It feels like I'm giving it 1/4 throttle although im all the way down. When the air is cool or the engine just started it runs amazing. It takes about 10 miutes on a hot day and like 30 when its cold, so its not the o2's.
Things I have done are:
Replaced plugs, wires, dizzy cap, rotor, ECT, o2's, cleaned MAF and IAT.
I have no codes.
Other threads like this they it seems like they just throw parts at it untill they find the missing link. It's a 95 AODE. I was thinking about:
Checking fuel pressure when it starts happening, and in my head some possible suspects are, TFI, IAT, MAP. I pass the cylinder balance test with 99. This has been going on for like 3 months. :-/. Anything you guys can suggest will be great.
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Sep 25, 2005
#2
  • Sep 25, 2005
  • #2
your sayin that it feels like you are getting 1/4 throttle power when you take off but you are actually flooring it?? how many miles on the car?
 
S

Synned

took tubgirl on a date and got banned
Mar 31, 2005
991
1
0
Philly
Sep 25, 2005
#3
  • Sep 25, 2005
  • #3
ninety15.0 said:
your sayin that it feels like you are getting 1/4 throttle power when you take off but you are actually flooring it?? how many miles on the car?
Click to expand...
Well I was kind of exaggerating. It feels slow from a takeoff but when I hit 3k rpms it starts pulling hard. I can easily break the tires loose when its running correctly, and im nowhere near that when its running incorrectly.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 25, 2005
#4
  • Sep 25, 2005
  • #4
Does it seem to lose power above 3000 RPM when warm? If so, replace the TFI module. Check the TFI wiring for loose connections, corrosion and damaged wiring.
 
S

Synned

took tubgirl on a date and got banned
Mar 31, 2005
991
1
0
Philly
Sep 25, 2005
#5
  • Sep 25, 2005
  • #5
I'm almost positive there is no power loss once it "kicks in". But when you first step on the pedal it feels like crap till a certain rpm.
 
C

coming4you

New Member
Jun 17, 2005
32
0
0
Toms river NJ
Sep 25, 2005
#6
  • Sep 25, 2005
  • #6
map

Map/bap.... Absolutly ... check your the hertz on your sensor... Which i believe in 95 was part of the mass air... i dont know where abouts you may be but here in new jersey around the toms river area we usually see about 158 to 206 hertz on the baro reading around here....
 
S

Synned

took tubgirl on a date and got banned
Mar 31, 2005
991
1
0
Philly
Sep 25, 2005
#7
  • Sep 25, 2005
  • #7
I was also thinking the MAP because the car does feel real bad when its humid outside, thats exactly what the MAP sensor reads right pressure of the atmosphere?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 25, 2005
#8
  • Sep 25, 2005
  • #8
A failing MAP sensor wil usually set code 22.

Code 22 MAP (vacuum) or BARO signal out of range. The MAP or BARO sensor is pretty much the same sensor for both Mass Air & Speed Density cars. The main difference is where it is connected. Mass Air cars vent it to the atmosphere, while Speed Density cars connect it to the intake manifold vacuum. Its purpose is to help set a baseline for the air/fuel mixture and changes in barometric pressure. The MAP or BAP sensor puts out a 5 volt square wave that changes frequency with variations in atmospheric pressure. The base is 154 HZ at 29.92" of mercury - dry sunny day at sea level, about 68-72 degrees. You need an oscilloscope or frequency meter to measure it.

Baro or MAP test using frequency meter - run the test key on engine off. The noise from the ignition system will likely upset the frequency meter. I used a 10 x oscilloscope probe connected from the frequency meter to the MAP/BAP to reduce the jitter in the meter's readout.

If it is defective, your air/fuel ratio will be off and the car’s performance & emissions will suffer
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 25, 2005
#9
  • Sep 25, 2005
  • #9
I had thought that the BAP sensor was in the EEC itself, by '94.

Good luck.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Sep 26, 2005
#10
  • Sep 26, 2005
  • #10
HISSIN50 said:
I had thought that the BAP sensor was in the EEC itself, by '94.

Good luck.
Click to expand...
I think you are right on this one. I checked the Autozone diagrams and didn't see an external MAP/BAP Sensor. I haven't had much opportunity to spend time working on the 94-95 stangs like I have with the older ones.

Autozone diagram for 94-98 cars - http://www.autozone.com/servlet/UiB..._us/0900823d/80/1d/db/3c/0900823d801ddb3c.jsp
 
S

Synned

took tubgirl on a date and got banned
Mar 31, 2005
991
1
0
Philly
Sep 26, 2005
#11
  • Sep 26, 2005
  • #11
Damn, so I'd have to replace the whole computer. Well that moves to the bottom of the list.. :/
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 26, 2005
#12
  • Sep 26, 2005
  • #12
jrichker said:
I think you are right on this one. I checked the Autozone diagrams and didn't see an external MAP/BAP Sensor. I haven't had much opportunity to spend time working on the 94-95 stangs like I have with the older ones.

Autozone diagram for 94-98 cars - http://www.autozone.com/servlet/UiB..._us/0900823d/80/1d/db/3c/0900823d801ddb3c.jsp
Click to expand...
If I toss enough dung against the barn wall, something will stick.

Synned, what is your air intake and air filter set up? On the SN's, heat saturation is more of an issue than on foxes, IMHO. And fan wash is a real issue on SN's given the tight confines.

And do you know if your IAT is indexed? Given its relative location, I think it is important to keep it so (so = indexed). And it takes like 30 seconds to do.

I am sure nothing I said will help, but the stuff is easy/free and when I am stumped, I have to go back and redo things I did before and sometimes I see something or I happen to fix or jostle (sp) a connection, etc, which makes a difference.

Good luck.
 
You must log in or register to reply here.

Similar threads

P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
439
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
613
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
683
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?