• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

power steering - Rack is moving

  • Thread starter Thread starter subcreep
  • Start date Start date Mar 23, 2006

subcreep

New Member
Dec 1, 2003
30
0
0
Jax, FL
Mar 23, 2006
#1
  • Mar 23, 2006
  • #1
Okay, I just replaced a worn out rack on my '92 LX and the new rack is moving side-to-side when I turn the wheels. The new rack is the quick ratio, and I installed it with prothane poky rack bushings. I took the car to get it aligned yesterday and they told me the rack was moving, and they said that they had tried to tighten it down while it was on the lift. What are the torque specs for the rack, and is there a difference in diameter for the bushings on the quick ratio rack versus the normal rack? I really don't want to pull this rack back off after all of the work it took to replace it!
 

rd

Founding Member
Jan 12, 2000
3,316
63
109
Ocean Springs MS
Mar 23, 2006
#2
  • Mar 23, 2006
  • #2
The rack and mounting bushing diameter should be the same for any of the racks. The rack mount bolts are good sized, and do take a good bit of tightening. Cant quote the spec right now.

It is also possible that if the poly bushings were not tight, they are allowing movement. If you have the offset bushings and they are not tight, they may have more tendency to rotate.

Tightening should fix it.
 
K

kn7671

New Member
Aug 18, 2004
60
0
0
Arlington, TX
Mar 23, 2006
#3
  • Mar 23, 2006
  • #3
Energy Suspension sells three different Rack & Pinion bushing, all dependent on the year on the rack. Since you replaced it, there is no telling what year rack it is, as I think all will work.

Back to the real problem, yes, there are different O.D. bushing for the rack & pinion bushings, you got the wrong ones for your rack.
 

subcreep

New Member
Dec 1, 2003
30
0
0
Jax, FL
Mar 23, 2006
#4
  • Mar 23, 2006
  • #4
My lx is a '92, the bushings I bought were for a 90-93. We only torqued the bolts down with the impact wrench. I think the thing puts down 120 ft-lbs of torque. Anybody know the torques specs?
 
K

kn7671

New Member
Aug 18, 2004
60
0
0
Arlington, TX
Mar 23, 2006
#5
  • Mar 23, 2006
  • #5
Only 30-40 ft lbs.
 
You must log in or register to reply here.

Similar threads

J
Suspension Foxbody mustang Steering shaft issue
  • Jakub2537
  • Sep 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
341
Fox 5.0 Mustang Tech Sep 11, 2026
gkomo
Suspension 87 steering wheel slightly wobbles after new Rag joint install
  • R82148V
  • Jun 16, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
1K
Fox 5.0 Mustang Tech Jun 24, 2025
R82148V
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
468
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
891
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
New Member with a 1992
  • Clutchfork
  • Oct 18, 2025
  • The Welcome Wagon
Replies
5
Views
445
The Welcome Wagon Oct 19, 2025
Clutchfork
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?