Power Steering

9

97fxdwg

New Member

May 7, 2004

105

0

0

Oct 29, 2004

#1

• Oct 29, 2004

• #1

Okay, still dealing with the PO's "mods" here and I would really appreciate some help. I just installed a new (rebuilt) power steering pump and am AMAZED by the difference. I must have had ZERO assist previously. But............. it squeals like a BIG pig at the stops, (belt? too tight? too loose?), and it seems to turn easier to the right than to the left. Any suggestions?
Thanks!!

 

S

ssppiitt

New Member

Apr 8, 2003

206

0

0

Mountain View, Ca.

Oct 29, 2004

#2

• Oct 29, 2004

• #2

Sounds like the belt is to loose.

 

9

97fxdwg

New Member

May 7, 2004

105

0

0

Oct 29, 2004

#3

• Oct 29, 2004

• #3

Any other thoughts? It's pretty freakin' tight right now!

 

S

ssppiitt

New Member

Apr 8, 2003

206

0

0

Mountain View, Ca.

Oct 29, 2004

#4

• Oct 29, 2004

• #4

It would not "squeal like a pig" if it was too tight. It squeals when the belt is slipping because it is too loose.

 

9

97fxdwg

New Member

May 7, 2004

105

0

0

Oct 29, 2004

#5

• Oct 29, 2004

• #5

Copy that! When da Boss brings it home, I'll tighten it up.... and report results thereafter.
Thanks

 

O

Ozsum2

New Member

Jul 28, 2004

695

1

0

Oct 29, 2004

#6

• Oct 29, 2004

• #6

You may need to replace the belt. Once it turns "piggy" and startes to sqeal, it can glaze and still slip. Also, pay attention to the width of the belt and the pulley. Get one that is the same size as the pulley so that it fits down into the pulley so the sides of the belt help with the grip. You don't want a belt riding up high and barely making contact on the edges. No grip there.

 

65fastback2+2

New Member

Aug 4, 2003

1,229

0

0

Louisville, KY

Oct 29, 2004

#7

• Oct 29, 2004

• #7

ssppiitt said:

It would not "squeal like a pig" if it was too tight. It squeals when the belt is slipping because it is too loose.

Click to expand...

exactly, and turning easier to the right than to the left would mean your control valve needs adjustment and your ball stud in the drag link should prolly be replaced.

 

9

97fxdwg

New Member

May 7, 2004

105

0

0

Oct 29, 2004

#8

• Oct 29, 2004

• #8

Quote: exactly, and turning easier to the right than to the left would mean your control valve needs adjustment and your ball stud in the drag link should prolly be replaced.

Oh-oh! Where is my control valve and where/what is the drag link?

 

65fastback2+2

New Member

Aug 4, 2003

1,229

0

0

Louisville, KY

Oct 29, 2004

#9

• Oct 29, 2004

• #9

97fxdwg said:

Quote: exactly, and turning easier to the right than to the left would mean your control valve needs adjustment and your ball stud in the drag link should prolly be replaced.

Oh-oh! Where is my control valve and where/what is the drag link?

Click to expand...

take off your left tire and follow the power steering hoses, from the pump the first thing the power steering hoses go to is the control valve.

drag link is the long bar that houses the control valve, the tie rods, pitman and idler arms connect to the drag link.

 

9

97fxdwg

New Member

May 7, 2004

105

0

0

Oct 29, 2004

#10

• Oct 29, 2004

• #10

I just tightened the hell out of the belt and it squeals worse now.

 

O

Ozsum2

New Member

Jul 28, 2004

695

1

0

Nov 1, 2004

#11

• Nov 1, 2004

• #11

97fxdwg said:

I just tightened the hell out of the belt and it squeals worse now.

Click to expand...

Did you read my above post?

 

J

JB66

New Member

Aug 21, 2004

565

1

0

New York

Nov 1, 2004

#12

• Nov 1, 2004

• #12

It truly sounds like your control valve is mis-assembled or stuck. The pump is squealing because it thinks the wheels are turned fully in one direction (it can't pump through a closed line). Check to make sure the control valve actually moves with the car shut off. If it does, it's not stuck, but needs to be adjusted. Let us know and I'll post the procedure.

 

9

97fxdwg

New Member

May 7, 2004

105

0

0

Nov 8, 2004

#13

• Nov 8, 2004

• #13

Okay, almost back in action (or should I say, OUT of traction?) and will get down to the attempted fix per Ozsum2 & JB66. Report won't be "out" for a week but I just wanted to say "thanks" and that no ignoring was going on. Minor but regular medical maintenance got in the way.