• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Power Stop Brakes

  • Thread starter Thread starter Maxpowers
  • Start date Start date Mar 21, 2011

Maxpowers

Member
Sep 9, 2009
859
2
19
Pittsburgh, Pa
Mar 21, 2011
#1
  • Mar 21, 2011
  • #1
Have any of you ever used these brakes? I'm not looking for something that will stop on a dime, just a little better than stock. Car gets to the strip at least once a month, and to the auto X maybe once a year...if that.

Now I would normally just go to NAPA, and get a decent rotor and an very good pad. The thing is that Summit is luring me into their store like an old man with candy in a box van. They sent me a discount in the mail, and I have no other parts I'm looking to buy at this point.

Links:
Fronts:
Power Stop K1301 - Power Stop Brake Rotor and Pad Combos - Overview - SummitRacing.com
Rears:
Power Stop K1303 - Power Stop Brake Rotor and Pad Combos - Overview - SummitRacing.com
 

sneaky98gt

10 Year Member
Apr 23, 2008
2,387
144
114
NC State University
Mar 21, 2011
#2
  • Mar 21, 2011
  • #2
That's the same rotors and pads I'm running. I have no complaints. They are quiet, leave little dust (which is really easy to clean off anyway), and are a big improvement over stock.





While you're at it, go ahead and paint the calipers, re-rubberize the fenderwells, and other such things. The difference in how good the car looks is HUGE.

Also, you can get those EXACT rotors and pads from Ebay for half that price. http://cgi.ebay.com/ebaymotors/Dril...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories This is the seller I bought them from, and I have zero complaints. Other forum members have had good luck with them as well. Heck, it's hard to go wrong for $160 for a full set of rotors and ceramic pads. The only thing is, I don't know if I'd run a drilled rotor at a road track. If you would rather go just slotted, you can call the Ebay seller and they will gladly hook you up with whatever you want.
 

joshjwc9

Active Member
Jun 12, 2006
1,095
17
39
Palm Harbor, FL
Mar 21, 2011
#3
  • Mar 21, 2011
  • #3
Same here. I ordered from them but had to call to match a Mach front rotor and stock GT rears. Running their ceramic pads and just slotted rotors in the rear and HP+ pads and just slotted fronts. The zinc coating lasts about a year and a half in the rainy FL weather down here.

My car is a DD and I've never had any issues since going with these guys. I've beaten on these brakes without any fading, yes, they've gotten hot, but that's why I went with a harder compound front pad. Sure they dust more, but they've saved my ass in tight situations with people cutting me off.
 

Maxpowers

Member
Sep 9, 2009
859
2
19
Pittsburgh, Pa
Mar 22, 2011
#4
  • Mar 22, 2011
  • #4
Someone school me real quick on why drilled and slotted would not be good for 6 to 7 track passes a year. I think I'm a little confused.
 

sneaky98gt

10 Year Member
Apr 23, 2008
2,387
144
114
NC State University
Mar 22, 2011
#5
  • Mar 22, 2011
  • #5
Maxpowers said:
Someone school me real quick on why drilled and slotted would not be good for 6 to 7 track passes a year. I think I'm a little confused.
Click to expand...

They are fine for the drag strip.

The reason they (drilled) aren't as good on a road course is because under the extra stress and excess heat, they tend to crack. Slotted are fine, and drilled probably are somewhat, but they do tend to crack if you get them really hot.
 

Maxpowers

Member
Sep 9, 2009
859
2
19
Pittsburgh, Pa
Mar 23, 2011
#6
  • Mar 23, 2011
  • #6
Ok. Well the road course is a huge maybe. I don't plan on going there but there's always the chance.
 
You must log in or register to reply here.

Similar threads

Brake pad and rotor upgrade
  • Sparky714
  • Aug 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
627
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 17, 2026
Sparky714
H
Strange steering/brake issue
  • Haxmaster
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
181
SN95 4.6L Mustang Tech Jun 3, 2026
squeak93
Aluminum non-metric brake calipers for use on 11" granada rotors?
  • Blue Thunder
  • May 21, 2024
  • 1974 - 1978 Mustang II Talk & Tech
Replies
9
Views
1K
1974 - 1978 Mustang II Talk & Tech Jul 24, 2024
65ShelbyClone
Progress Thread Komo's 1990 GT - Parts Gathering Purgatory & Home Remodel
  • gkomo
  • Sep 23, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 104 105 106
Replies
2K
Views
91K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Monday at 2:37 PM
gkomo
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
457
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?