power window help

S

speedfreakzx9r

New Member

Jul 15, 2007

4

0

0

Jul 15, 2007

#1

• Jul 15, 2007

• #1

i went to put my window down today and when it went down into the door it didnt stop.it was like the window motor kept pulling it down into the door. then i put it up and it wouldnt stop itself.anyone know what part in the door would cause this. also my heat and air only blow out the defrost no matter what setting i put it on. i was wondering if there was a vaccum line i could look at or something. thanks

 

cjones

Founding Member

Jul 20, 2002

1,561

0

37

Avondale, AZ

Jul 15, 2007

#2

• Jul 15, 2007

• #2

the vacuum line is on the passenger side of the engine compartment by the firewall.

i'll get back with the electrical

 

C

cbarr300

Member

Jun 6, 2006

746

0

17

goose creek, SC

Jul 15, 2007

#3

• Jul 15, 2007

• #3

yeah, that vac line is famous for coming off....at least on mine.

 

cjones

Founding Member

Jul 20, 2002

1,561

0

37

Avondale, AZ

Jul 15, 2007

#4

• Jul 15, 2007

• #4

does it stop when you release the switch?? if so, check the upper limiting upstop.

for the down, does it stop just the motor doesn't stop?? if so, check the One Touch Window Down Module. it's in the drivers door. the Y and R wires go to the motor.

 

S

speedfreakzx9r

New Member

Jul 15, 2007

4

0

0

Jul 15, 2007

#5

• Jul 15, 2007

• #5

when you push the switch for it to go down automatically once it gets down inside the door the motor is still running and the window is jumping around inside the door and i have to hit up on the switch.

 

cjones

Founding Member

Jul 20, 2002

1,561

0

37

Avondale, AZ

Jul 15, 2007

#6

• Jul 15, 2007

• #6

it's probably the One Touch Window Down Module inside the door. it's suppose to cut power once it comes into resistance.

 

S

speedfreakzx9r

New Member

Jul 15, 2007

4

0

0

Jul 16, 2007

#7

• Jul 16, 2007

• #7

thanks. im going to try to tackle these problems this weekend

 

I

izeaha

New Member

Jun 9, 2007

20

0

0

Jul 17, 2007

#8

• Jul 17, 2007

• #8

i had the same problem with the heat and air. but on my 94 gt the vacumm leak was coming from the drivers side on the fender. their is a vacumm line connection their.