My drivers side power window quit working. It's been down for a few months and I finally decided to try to fix it. I tried tapping the motor with a hammer under load to no avail. I pulled the motor out and hooked it back to the switch. I hit it and the motor ran. I reinstalled it in the door and the window worked. I put the door back together and the window still worked. I then turned the engine on and tried it, again it worked. I rolled down the passenger side window and back up. Then I tried the drivers side and it won't budge.
Before I go pulling the door apart again *grumble* are there any other possibilities at this point OTHER than the motor? I don't want to go spending $100 on the motor and have that not be the problem.
When the window did work for a few minutes, the tracks seemed to move smoothly and without any noticeable "struggle". When I push the button, I here a loud click (relay?) but the motor doesn't even try move.
Any help or ideas would be much appreciated.
Thanks!
Before I go pulling the door apart again *grumble* are there any other possibilities at this point OTHER than the motor? I don't want to go spending $100 on the motor and have that not be the problem.
When the window did work for a few minutes, the tracks seemed to move smoothly and without any noticeable "struggle". When I push the button, I here a loud click (relay?) but the motor doesn't even try move.
Any help or ideas would be much appreciated.
Thanks!